X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdelta.h;h=08b28ca8ac7f3e5809924495c356d76c527ba676;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=4b75e158bd91975867834b3f9d14f81979c7526a;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/delta.h b/include/configs/delta.h index 4b75e15..08b28ca 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -43,8 +43,8 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -59,11 +59,11 @@ #endif #define CONFIG_HARD_I2C 1 /* required for DA9030 access */ -#define CFG_I2C_SPEED 400000 /* I2C speed */ -#define CFG_I2C_SLAVE 1 /* I2C controllers address */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 1 /* I2C controllers address */ #define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ -#define CFG_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ -#define CFG_I2C_INIT_BOARD 1 +#define CONFIG_SYS_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ +#define CONFIG_SYS_I2C_INIT_BOARD 1 /* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ #define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */ @@ -125,11 +125,11 @@ #include /* for OHCI_REGS_BASE */ -#undef CFG_USB_OHCI_BOARD_INIT -#define CFG_USB_OHCI_CPU_INIT 1 -#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE -#define CFG_USB_OHCI_SLOT_NAME "delta" -#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#undef CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE OHCI_REGS_BASE +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "delta" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 #define LITTLEENDIAN 1 /* used by usb_ohci.c */ @@ -151,39 +151,39 @@ /* * Miscellaneous configurable options */ -#define CFG_HUSH_PARSER 1 -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CFG_LONGHELP /* undef to save memory */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ #else -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #endif -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_DEVICE_NULLDEV 1 +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CFG_MEMTEST_START 0x80400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x80400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */ -#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */ +#define CONFIG_SYS_HZ 3250000 /* incrementer freq: 3.25 MHz */ /* Monahans Core Frequency */ -#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ -#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ +#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ +#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/* #define CFG_MMC_BASE 0xF0000000 */ +/* #define CONFIG_SYS_MMC_BASE 0xF0000000 */ /* * Stack sizes @@ -209,26 +209,26 @@ #define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ #define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ -#define CFG_DRAM_BASE 0x80000000 /* at CS0 */ -#define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */ +#define CONFIG_SYS_DRAM_BASE 0x80000000 /* at CS0 */ +#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB Ram */ -#undef CFG_SKIP_DRAM_SCRUB +#undef CONFIG_SYS_SKIP_DRAM_SCRUB /* * NAND Flash */ #undef CONFIG_NAND_LEGACY -#define CFG_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ -#undef CFG_NAND1_BASE +#define CONFIG_SYS_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ +#undef CONFIG_SYS_NAND1_BASE -#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ /* nand timeout values */ -#define CFG_NAND_PROG_ERASE_TO 3000 -#define CFG_NAND_OTHER_TO 100 -#define CFG_NAND_SENDCMD_RETRY 3 +#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 +#define CONFIG_SYS_NAND_OTHER_TO 100 +#define CONFIG_SYS_NAND_SENDCMD_RETRY 3 #undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ /* NAND Timing Parameters (in ns) */ @@ -245,9 +245,9 @@ #define NAND_TIMING_tAR 10 /* NAND debugging */ -#define CFG_DFC_DEBUG1 /* usefull */ -#undef CFG_DFC_DEBUG2 /* noisy */ -#undef CFG_DFC_DEBUG3 /* extremly noisy */ +#define CONFIG_SYS_DFC_DEBUG1 /* usefull */ +#undef CONFIG_SYS_DFC_DEBUG2 /* noisy */ +#undef CONFIG_SYS_DFC_DEBUG3 /* extremly noisy */ #define CONFIG_MTD_DEBUG #define CONFIG_MTD_DEBUG_VERBOSE 1 @@ -260,7 +260,7 @@ #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 -#define CFG_NO_FLASH 1 +#define CONFIG_SYS_NO_FLASH 1 #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_OFFSET 0x40000