X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdb-mv784mp-gp.h;h=b4cfa61d4e7540633ad82129cf0fcde58a8f8e27;hb=aca1f6789aa2e384a58909fa7a9696db9d607675;hp=dd0c3cb7ad9cab1c7144a2cd0d3059feb1980d07;hpb=808cea90f5ab86fcdd9b0190fdb4c70cd6a060fc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index dd0c3cb..b4cfa61 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -7,42 +7,27 @@
 #define _CONFIG_DB_MV7846MP_GP_H
 
 /*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_DB_784MP_GP		/* Board target name for DDR training */
-
-/*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
 
 /* I2C */
-#define CONFIG_SYS_I2C_LEGACY
-#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE		0x0
-#define CONFIG_SYS_I2C_SPEED		100000
 
 /* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* SATA support */
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_LBA48
-
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
 /* NAND */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -65,20 +50,8 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
-
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
-#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 #define CONFIG_SPD_EEPROM		0x4e
-#define CONFIG_BOARD_ECC_SUPPORT	/* this board supports ECC */
 
 #endif /* _CONFIG_DB_MV7846MP_GP_H */