X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdb-88f6820-gp.h;h=bba2b607aa8621e11ddef16f5e792502bff61b04;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=6bae063ae4809d41afcf53da49515b0b4b042425;hpb=8bef03683623d6a7adfff1f859ed44fad9e92ed7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 6bae063..bba2b60 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -13,65 +13,15 @@
 /* I2C */
 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
 
-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-					 CONFIG_SYS_SCSI_MAX_LUN)
-
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
-
 /* Environment in SPI NOR flash */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
 	"initrd_high=0x10000000\0"
 
-/* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
- * SPL_BOOT_SDIO_MMC_CARD	- Booting via SDIO/MMC card (partition 1)
- */
-#define SPL_BOOT_SPI_NOR_FLASH		1
-#define SPL_BOOT_SDIO_MMC_CARD		2
-#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH
-
-/* Defines for SPL */
-#define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
-
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
-/* SPL related MMC defines */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
-#endif
-#endif
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros