X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdb-88f6820-gp.h;h=900c96267901622214ecabd26a71e64b288b069a;hb=412326d1bc2d346d7b4faad6fa547eaf065681a2;hp=a3ab6ef037c4913faa4e94039cb0f6b168b0b38a;hpb=ab21ecef7a38dd211fe6db35c6e60800445eb6a2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index a3ab6ef..900c962 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_DB_88F6820_GP_H
@@ -11,14 +10,6 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-/*
- * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
- * for DDR ECC byte filling in the SPL before loading the main
- * U-Boot into it.
- */
-#define	CONFIG_SYS_TEXT_BASE	0x00800000
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /*
@@ -32,10 +23,6 @@
 #define CONFIG_SYS_I2C_SLAVE		0x0
 #define CONFIG_SYS_I2C_SPEED		100000
 
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-
 /*
  * SDIO/MMC Card Configuration
  */
@@ -58,17 +45,13 @@
 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
 
-#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
@@ -87,9 +70,7 @@
 #define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_TEXT_BASE		0x40000030
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
@@ -104,8 +85,6 @@
 
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
 #endif