X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdb-88f6820-amc.h;h=b9d03d253d99d9d793d6b1b921d4cb742dc8538f;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=61b91dd91f0fa5e2a20b88e63c8fff8c6fa18ade;hpb=d22c8be964a870f59d2fdab6c67cefa0c4799364;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index 61b91dd..b9d03d2 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -10,73 +10,21 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
-
-/*
- * Commands configuration
- */
-
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
-
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
 
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-/* PCIe support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* NAND */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
 	"initrd_high=0x10000000\0"
 
-/* SPL */
-/*
- * Select the boot device here
- *
- * Currently supported are:
- * SPL_BOOT_SPI_NOR_FLASH	- Booting via SPI NOR flash
- *
- * MMC is not populated on this board.
- * NAND support may be added in the future.
- */
-#define SPL_BOOT_SPI_NOR_FLASH		1
-#define CONFIG_SPL_BOOT_DEVICE		SPL_BOOT_SPI_NOR_FLASH
-
-/* Defines for SPL */
-#define CONFIG_SPL_SIZE			(140 << 10)
-#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)
-
-#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MALLOC_SIMPLE
-#endif
-
-#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
-#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
-/* SPL related SPI defines */
-#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
  */
 #include "mv-common.h"
-#undef CONFIG_SYS_MAXARGS
-#define CONFIG_SYS_MAXARGS 96
 
 #endif /* _CONFIG_DB_88F6820_AMC_H */