X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fda850evm.h;h=946633271052776820a41114a2514b1cb8bad02e;hb=cb04db155f4e7ccaec1b961d8a84e1a1b9524594;hp=37a485b0a9c08a97a69b05f487d34c56cff2f404;hpb=6eed3786c68c8a49d2986ac4f9f6e3071b769d41;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 37a485b..9466332 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -20,7 +20,6 @@
 #define CONFIG_USE_SPIFLASH
 #endif
 
-
 /*
  * SoC Configuration
  */
@@ -133,7 +132,6 @@
 /*
  * Serial Driver info
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
@@ -142,10 +140,6 @@
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
 #define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_CMD_SF
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
@@ -259,11 +253,9 @@
 /*
  * U-Boot general configuration
  */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT	"U-Boot > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
@@ -271,12 +263,10 @@
 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
-#define CONFIG_OF_LIBFDT
 
 /*
  * Linux Information
@@ -294,29 +284,21 @@
 /*
  * U-Boot commands
  */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
 
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
 #undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
 #endif
 
 #ifdef CONFIG_USE_NAND
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_NAND
 
 #define CONFIG_CMD_MTDPARTS
@@ -329,10 +311,6 @@
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SAVEENV
 #endif
 
 #if !defined(CONFIG_USE_NAND) && \
@@ -341,7 +319,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE		(16 << 10)
-#undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_ENV
 #endif