X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fda850evm.h;h=58c902431d133d9f5c27cb6b707a816a80590b70;hb=13e28f4987dd514ddbda36915bd9b8996a2d328d;hp=4d651264dd2ef443e32e205a6d956314313f38c6;hpb=c27178ba3649f539c9f1890ea147f4c5415f63b5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 4d65126..58c9024 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -13,34 +13,25 @@
 /*
  * Board
  */
-/* check if direct NOR boot config is used */
-#ifndef CONFIG_DIRECT_NOR_BOOT
-#define CONFIG_USE_SPIFLASH
-#endif
 
 /*
  * SoC Configuration
  */
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
-#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
-#ifdef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_DV_NOR_BOOT_CFG	(0x11)
 #endif
 
 /*
  * Memory Info
  */
-#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE
-#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000
 /* memtest start addr */
 
 /* memtest will be run on 16MB */
@@ -107,16 +98,10 @@
 
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
 
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
-#endif
-
 /*
  * I2C Configuration
  */
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
-#endif
 
 /*
  * Flash & Environment
@@ -131,9 +116,6 @@
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
@@ -147,59 +129,24 @@
 				39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
 				49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
 				59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_LOAD
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_NAND_SELF_INIT
-#endif
-#endif
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
 #endif
 
-#ifdef CONFIG_USE_NOR
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ	(128 << 10) /* 128KB */
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 #define PHYS_FLASH_SIZE			(8 << 20) /* Flash size 8MB */
-#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
-	       + 3)
 #endif
 
 /*
  * U-Boot general configuration
  */
-#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
 
 /*
  * Linux Information
  */
 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
 #define CONFIG_HWCONFIG		/* enable hwconfig */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-#define CONFIG_BOOTCOMMAND \
-		"run envboot; " \
-		"run mmcboot; "
 
 #define DEFAULT_LINUX_BOOT_ENV \
 	"loadaddr=0xc0700000\0" \
@@ -220,27 +167,9 @@
 	"console=ttyS2,115200n8\0" \
 	"hwconfig=dsp:wake=yes"
 
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#if !defined(CONFIG_MTD_RAW_NAND) && \
-	!defined(CONFIG_USE_NOR) && \
-	!defined(CONFIG_USE_SPIFLASH)
-#endif
-
-/* USB Configs */
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
-
-#ifndef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_SPL_BUILD
 /* defines for SPL */
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
-						CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_STACK	0x8001ff00
-#define CONFIG_SPL_MAX_FOOTPRINT	32768
-#define CONFIG_SPL_PAD_TO	32768
+
 #endif
 
 /* Load U-Boot Image From MMC */
@@ -248,13 +177,6 @@
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
 
-#ifdef CONFIG_DIRECT_NOR_BOOT
-#define CONFIG_SYS_INIT_SP_ADDR		0x8001ff00
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
-					GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_DIRECT_NOR_BOOT */
-
 #include <asm/arch/hardware.h>
 
 #endif /* __CONFIG_H */