X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fda850evm.h;h=3321419ac694b4ecbff37da73988e78241a9bfe5;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=af220febf49a3160680447b274bf2fa85ee94e00;hpb=a212d6966bfcf393e82e44246d7dfb6de032e82a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index af220fe..3321419 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -31,8 +31,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_DA850_PLL_INIT
-#define CONFIG_SYS_DA850_DDR_INIT
 
 #ifdef CONFIG_DIRECT_NOR_BOOT
 #define CONFIG_ARCH_CPU_INIT
@@ -147,8 +145,6 @@
 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
 
 #ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
@@ -205,7 +201,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -254,14 +249,12 @@
  * U-Boot general configuration
  */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
@@ -278,7 +271,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS		\
 	"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_EXTRA_ENV_SETTINGS	"hwconfig=dsp:wake=yes"
 
 /*
@@ -303,7 +295,6 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_LZO
 #define CONFIG_RBTREE
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #endif
 
@@ -321,18 +312,7 @@
 
 /* SD/MMC configuration */
 #ifndef CONFIG_USE_NOR
-#define CONFIG_MMC
-#define CONFIG_DAVINCI_MMC_SD1
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#endif
-
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifndef CONFIG_DIRECT_NOR_BOOT
@@ -342,12 +322,7 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
 						CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000
@@ -357,10 +332,6 @@
 
 /* Load U-Boot Image From MMC */
 #ifdef CONFIG_SPL_MMC_LOAD
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x75
-#undef CONFIG_SPL_SPI_SUPPORT
 #undef CONFIG_SPL_SPI_LOAD
 #endif