X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fda850evm.h;h=1f3b003c2519da58f7256cdd0054126faa226f01;hb=f519b3649156ee6d7945f7003cf8934bd9b39f1e;hp=63abb80e9665ed587ac5429ad84c6b3077e777e9;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 63abb80..1f3b003 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -20,7 +20,6 @@
 #define CONFIG_USE_SPIFLASH
 #endif
 
-
 /*
  * SoC Configuration
  */
@@ -32,7 +31,6 @@
 #define CONFIG_SYS_OSCIN_FREQ		24000000
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
 
 #ifdef CONFIG_DIRECT_NOR_BOOT
@@ -141,7 +139,6 @@
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
 
 #define CONFIG_SPI
-#define CONFIG_CMD_SF
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
@@ -149,8 +146,6 @@
 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
 
 #ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
@@ -207,7 +202,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -263,14 +257,11 @@
 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
-#define CONFIG_OF_LIBFDT
 
 /*
  * Linux Information
@@ -282,18 +273,13 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTARGS		\
 	"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_EXTRA_ENV_SETTINGS	"hwconfig=dsp:wake=yes"
 
 /*
  * U-Boot commands
  */
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 
 #ifdef CONFIG_CMD_BDI
@@ -301,9 +287,6 @@
 #endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
 #endif
 
 #ifdef CONFIG_USE_NAND
@@ -314,12 +297,10 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_LZO
 #define CONFIG_RBTREE
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_CMD_SPI
 #endif
 
 #if !defined(CONFIG_USE_NAND) && \
@@ -345,9 +326,6 @@
  */
 #ifdef CONFIG_MMC
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
 #endif
 
 #ifndef CONFIG_DIRECT_NOR_BOOT
@@ -357,12 +335,7 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
 						CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_LDSCRIPT	"board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_TEXT_BASE	0x80000000
@@ -372,10 +345,6 @@
 
 /* Load U-Boot Image From MMC */
 #ifdef CONFIG_SPL_MMC_LOAD
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x75
-#undef CONFIG_SPL_SPI_SUPPORT
 #undef CONFIG_SPL_SPI_LOAD
 #endif