X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fda850evm.h;h=0f41748093f75a9a30629974d1387a1dbd37b2ed;hb=f9a48654ee70fbad29f487d074fd36a1548b4209;hp=2bb4e47496b483876168f835a833bc097f9cd2f2;hpb=e2dce7a532ea07394d89dd44592d0e9eedbd9b6a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 2bb4e47..0f41748 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -13,10 +13,6 @@
 /*
  * Board
  */
-/* check if direct NOR boot config is used */
-#ifndef CONFIG_DIRECT_NOR_BOOT
-#define CONFIG_USE_SPIFLASH
-#endif
 
 /*
  * SoC Configuration
@@ -28,7 +24,7 @@
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
-#ifdef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_DV_NOR_BOOT_CFG	(0x11)
 #endif
 
@@ -107,10 +103,6 @@
 
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
 
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
-#endif
-
 /*
  * I2C Configuration
  */
@@ -152,9 +144,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
 
 #ifndef CONFIG_SPL_BUILD
@@ -166,11 +155,10 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT	10
 #endif
 
-#ifdef CONFIG_USE_NOR
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_MAX_FLASH_BANKS	1 /* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ	(128 << 10) /* 128KB */
 #define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
@@ -223,16 +211,11 @@
 #define CONFIG_CLOCKS
 #endif
 
-#if !defined(CONFIG_MTD_RAW_NAND) && \
-	!defined(CONFIG_USE_NOR) && \
-	!defined(CONFIG_USE_SPIFLASH)
-#endif
-
 /* USB Configs */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
-#ifndef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_SPL_BUILD
 /* defines for SPL */
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
 						CONFIG_SYS_MALLOC_LEN)
@@ -247,12 +230,12 @@
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
 
-#ifdef CONFIG_DIRECT_NOR_BOOT
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_INIT_SP_ADDR		0x8001ff00
 #else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 					GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_DIRECT_NOR_BOOT */
+#endif /* CONFIG_MTD_NOR_FLASH */
 
 #include <asm/arch/hardware.h>