X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcsb472.h;h=f6a456c18f11f06fcb80864e0bfcafd9d74ab62d;hb=842033e6964e9e5d34aca893c1845416dd8ac2cc;hp=71eb083e33b8cd68f75518a2ce0e9da31bb346fb;hpb=a233631095eba3e853049f6656642e3a7ef1d73c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 71eb083..f6a456c 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -40,6 +40,8 @@
 #define CONFIG_LAST_STAGE_INIT	1	/* Call last_stage_init()	*/
 #define CONFIG_SYS_CLK_FREQ     25000000 /* external frequency to pll   */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 /*
  * OS Bootstrap configuration
  *
@@ -120,9 +122,6 @@
  *
  */
 #undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "	/* hush shell secondary prompt */
-#endif
 
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
@@ -159,6 +158,12 @@
  * UART configuration
  *
  */
+#define CONFIG_CONS_INDEX		1	/* Use UART0		*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* use internal serial clock */
 #define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
@@ -184,7 +189,6 @@
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
 					/* 32usec min. for LXT971A	*/
 #define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
-#define CONFIG_NET_MULTI
 
 /*
  * RTC configuration
@@ -199,6 +203,7 @@
  *
  */
 #define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define PCI_HOST_ADAPTER	0	/* configure ar pci adapter     */
 #define PCI_HOST_FORCE		1	/* configure as pci host        */
 #define PCI_HOST_AUTO		2	/* detected via arbiter enable  */
@@ -244,7 +249,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFF800000
 #define CONFIG_SYS_FLASH_SIZE		0x00800000
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
 
@@ -284,9 +289,8 @@
  *
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE	128 /* byte size reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -295,13 +299,4 @@
  */
 #define CONFIG_I2CFAST		1	/* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #endif	/* __CONFIG_H */