X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcsb272.h;h=acd9c93efd992b358f65066ba964ee8698bac95c;hb=37a3bda0c9c8a2ffbf7e2a9e121177a3385a0626;hp=5d3b09aa3c2df06e6d55796231acb999d96095cc;hpb=ee924e00300bd1136589b2d5f8ad1f008df01bd4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 5d3b09a..acd9c93 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -40,6 +40,8 @@
 #define CONFIG_LAST_STAGE_INIT	1	/* Call last_stage_init()	*/
 #define CONFIG_SYS_CLK_FREQ     33000000 /* external frequency to pll   */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 /*
  * OS Bootstrap configuration
  *
@@ -140,7 +142,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
 #define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-#define CONFIG_SYS_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_info (bd_t) */
 #define CONFIG_SYS_LOAD_ADDR		0x100000 /* default load address */
 
@@ -161,6 +162,12 @@
  * UART configuration
  *
  */
+#define CONFIG_CONS_INDEX		1	/* Use UART0		*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	3868400	/* use external serial clock */
 #undef  CONFIG_SYS_BASE_BAUD
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
@@ -172,6 +179,7 @@
  *
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
 
@@ -185,6 +193,7 @@
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
 					/* 32usec min. for LXT971A	*/
 #define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
+#define CONFIG_NET_MULTI
 
 /*
  * RTC configuration
@@ -244,7 +253,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_FLASH_BASE		0xFE000000
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 KB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserve 128 KB for malloc() */
 
@@ -296,13 +305,4 @@
 #define CONFIG_SYS_I2C_PLL_ADDR	0x58	/* I2C address of AMIS FS6377-01 PLL */
 #define CONFIG_I2CFAST		1	/* enable "i2cfast" env. setting     */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- *
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #endif	/* __CONFIG_H */