X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcorvus.h;h=e47f06bda3a9b499f21c503610de81a7298ff556;hb=5abc1a4523a5509ce37bc3ec818b660a48f4eafd;hp=a5255558da29d91f8d8714a6d71f0dc7e2704acd;hpb=eb6b50f631628f48b7e72432ae878e6ff0e306c3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index a525555..e47f06b 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -35,11 +35,7 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -47,7 +43,6 @@
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 
@@ -56,7 +51,6 @@
 #define CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
 #define CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -66,24 +60,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
+	(CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -105,30 +88,16 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
-#define CONFIG_USB_STORAGE
-
-/* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
 /* DFU class support */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
-#define CONFIG_SYS_CACHELINE_SIZE	SZ_8K
 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x100000
 #define CONFIG_ENV_OFFSET_REDUND	0x180000
 #define CONFIG_ENV_SIZE			SZ_128K
@@ -136,14 +105,6 @@
 #define CONFIG_BOOTCOMMAND						\
 	"nand read 0x70000000 0x200000 0x300000;"			\
 	"bootm 0x70000000"
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256k(env),256k(env_redundant),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"root=/dev/mtdblock7 rw rootfstype=jffs2"
-
-#define CONFIG_BAUDRATE			115200
 
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
@@ -152,7 +113,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -169,13 +129,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC