X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcorvus.h;h=8b8b1220b46b823f276134f4104112a60bca830b;hb=8d3a25685e4aac7070365a2b3c53c2c81b27930f;hp=68056125e9a8649fe399f4dd67edc637ce2503e3;hpb=850f788709cef8f7d53d571aec3bfb73b14c5531;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 6805612..8b8b122 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -17,7 +17,6 @@
 #include <asm/hardware.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_GENERIC_BOARD
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
  * adapting the initial boot program.
@@ -36,12 +35,7 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
@@ -49,7 +43,6 @@
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 
@@ -58,7 +51,6 @@
 #define CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
 #define CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -71,10 +63,7 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -82,10 +71,7 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
-
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
+	(CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -103,41 +89,23 @@
 
 /* Ethernet */
 #define CONFIG_MACB
+#define CONFIG_PHYLIB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
-#define CONFIG_USB_STORAGE
 
 /* USB DFU support */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_ATMEL_USBA
-
 /* DFU class support */
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
-/* USB DFU IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0908
-#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
-#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
-
-#define CONFIG_SYS_CACHELINE_SIZE	SZ_8K
 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
@@ -156,8 +124,6 @@
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
 
-#define CONFIG_BAUDRATE			115200
-
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE +	\
@@ -165,7 +131,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -182,13 +147,6 @@
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC