X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcorvus.h;h=55f77e4400a2efdbeed9a133e04b1b945a3c49cc;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=71b428f1f745201f1afb8ddea3025613c2210ebb;hpb=5c84ad097d829bb1e6460438f33e1536b23b3c9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 71b428f..55f77e4 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common board functions for siemens AT91SAM9G45 based boards
  * (C) Copyright 2013 Siemens AG
@@ -7,8 +8,6 @@
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -24,8 +23,6 @@
  * hex number here!
  */
 
-#define CONFIG_SYS_TEXT_BASE  0x72000000
-
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
@@ -39,11 +36,9 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 
@@ -57,26 +52,16 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
@@ -86,23 +71,15 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 #endif
 
 /* Ethernet */
 #define CONFIG_MACB
-#define CONFIG_PHYLIB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
-/* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
 /* DFU class support */
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
@@ -110,28 +87,10 @@
 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0x100000
-#define CONFIG_ENV_OFFSET_REDUND	0x180000
-#define CONFIG_ENV_SIZE			SZ_128K
 
 #define CONFIG_BOOTCOMMAND						\
 	"nand read 0x70000000 0x200000 0x300000;"			\
 	"bootm 0x70000000"
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk "				\
-	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256k(env),256k(env_redundant),256k(spare),"			\
-	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
-	"root=/dev/mtdblock7 rw rootfstype=jffs2"
-
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE +	\
-				 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
 /*
  * Size of malloc() pool
@@ -140,18 +99,12 @@
 				SZ_4M, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		(12 * SZ_1K)
 #define CONFIG_SPL_STACK		(SZ_16K)
 
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
@@ -179,4 +132,7 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
+#define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
+
 #endif