X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcorvus.h;h=55f77e4400a2efdbeed9a133e04b1b945a3c49cc;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=66fdbc2e9dab7177c76682cbf5cbf1fd08ce0c90;hpb=f0306a145b3234ae4bd3b46f2567b6f1ad7b8f4f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 66fdbc2..55f77e4 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -36,7 +36,6 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 /* serial console */
@@ -55,7 +54,6 @@
 #define CONFIG_BOOTP_BOOTFILESIZE
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
 
@@ -73,6 +71,7 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 #endif
 
 /* Ethernet */
@@ -88,9 +87,6 @@
 #define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6
 
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_OFFSET		0x100000
-#define CONFIG_ENV_OFFSET_REDUND	0x180000
-#define CONFIG_ENV_SIZE			SZ_128K
 
 #define CONFIG_BOOTCOMMAND						\
 	"nand read 0x70000000 0x200000 0x300000;"			\
@@ -103,16 +99,12 @@
 				SZ_4M, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		(12 * SZ_1K)
 #define CONFIG_SPL_STACK		(SZ_16K)
 
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)
 
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
@@ -140,4 +132,7 @@
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302
 
+#define CONFIG_SPL_PAD_TO		CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN		CONFIG_SPL_PAD_TO
+
 #endif