X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcontrolcenterdc.h;h=58d83e5f144f5e81b8ea18dc4dde472eb50fe1af;hb=72d81360aabd0485d3832d292bbea29c7c4554ef;hp=869b94bc9b5e9327dc3f65a8294402a1f3bc3394;hpb=f6127db8cc8dec22cf9cd6d6363d812f659ce517;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index 869b94b..58d83e5 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -20,10 +20,6 @@
  * U-Boot into it.
  */
 
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
-
-#define CONFIG_LOADADDR 		1000000
-
 /*
  * SATA/SCSI/AHCI configuration
  */
@@ -83,20 +79,11 @@
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
-/* SPL related SPI defines */
-#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
+#define CONFIG_SPL_I2C
 
 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 /* SPL related MMC defines */
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
-#define CONFIG_SYS_MMC_U_BOOT_OFFS		(168 << 10)
-#define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	(CONFIG_SYS_U_BOOT_OFFS / 512)
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
 #endif
@@ -145,7 +132,7 @@
 		" gpio clear ${gpio1}; gpio set ${gpio2};"			\
 		" fi; sleep 0.12; done\0"
 
-#define CONFIG_NFSBOOTCOMMAND								\
+#define NFSBOOTCOMMAND								\
 	"setenv bootargs root=/dev/nfs rw "						\
 	"nfsroot=${serverip}:${rootpath} "						\
 	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "	\
@@ -153,7 +140,7 @@
 	"tftpboot ${bootfile_addr} ${bootfile}; "						\
 	"bootm ${bootfile_addr}"
 
-#define CONFIG_MMCBOOTCOMMAND					\
+#define MMCBOOTCOMMAND					\
 	"setenv bootargs root=/dev/mmcblk0p3 rw rootwait "	\
 	"console=${consoledev},${baudrate} ${othbootargs}; "	\
 	"ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "	\