X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcontrolcenterd.h;h=e5d60fbf3c09bee70407bfc11f8f700ec3288f18;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=3f039784213d06e57da3a505c140a68cee9aa958;hpb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 3f03978..e5d60fb 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -26,10 +26,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #endif
@@ -39,22 +35,11 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE			/* BOOKE */
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_P1022
 #define CONFIG_CONTROLCENTERD
 #define CONFIG_MP			/* support multiple processors */
 
-
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENABLE_36BIT_PHYS
-#define CONFIG_FSL_LAW			/* Use common FSL init code */
-
-#ifdef CONFIG_TRAILBLAZER
-#define CONFIG_IDENT_STRING	" controlcenterd trailblazer 0.01"
-#else
-#define CONFIG_IDENT_STRING	" controlcenterd 0.01"
-#endif
 
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_ADDR_MAP
@@ -98,7 +83,6 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
-
 /*
  * Memory map
  *
@@ -138,8 +122,6 @@
 #define CONFIG_SYS_SDRAM_SIZE 1024
 #define CONFIG_VERY_BIG_RAM
 
-#define CONFIG_SYS_FSL_DDR3
-#define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -201,7 +183,6 @@
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 #ifndef CONFIG_TRAILBLAZER
-#define CONFIG_CMD_I2C
 #endif
 
 #define CONFIG_PCA9698			/* NXP PCA9698 */
@@ -216,8 +197,6 @@
  */
 #define CONFIG_HARD_SPI
 
-
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
 #define CONFIG_SF_DEFAULT_MODE		0
 #endif
@@ -227,14 +206,9 @@
 /*
  * MMC
  */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
-
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 
-
 #ifndef CONFIG_TRAILBLAZER
 
 /*
@@ -242,19 +216,14 @@
  */
 #define CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_CMD_BMP
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 #define CONFIG_CMD_PCI
@@ -326,8 +295,6 @@
  * USB
  */
 #define CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI_FSL
@@ -359,8 +326,6 @@
 
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
 /*
  * Command line configuration.
  */
@@ -384,24 +349,18 @@
 #ifndef CONFIG_TRAILBLAZER
 
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 /*
  * Board initialisation callbacks
  */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
 #else /* CONFIG_TRAILBLAZER */
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
@@ -413,7 +372,6 @@
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_DOS_PARTITION
 
 /*
  * For booting Linux, the board info and command line data
@@ -429,7 +387,6 @@
 
 #ifdef CONFIG_TRAILBLAZER
 
-#define CONFIG_BOOTDELAY	0	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE	115200
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
@@ -444,7 +401,6 @@
 
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE	115200
 
@@ -461,7 +417,7 @@
 	"consoledev=ttyS1\0"					\
 	"ramdiskaddr=2000000\0"					\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
-	"fdtaddr=c00000\0"					\
+	"fdtaddr=1e00000\0"					\
 	"fdtfile=controlcenterd.dtb\0"				\
 	"bdev=sda3\0"