X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcontrolcenterd.h;h=6641408fcbb182d91dccd02e1cc071514b758975;hb=5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f;hp=7347b68eb4ce798a325f9d7d582518419919b015;hpb=d26e34c4c4b6473fdbd412a3b2dc33a94b08e8ff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 7347b68..6641408 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -38,7 +38,6 @@
 #define CONFIG_CONTROLCENTERD
 #define CONFIG_MP			/* support multiple processors */
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENABLE_36BIT_PHYS
 
 #ifdef CONFIG_PHYS_64BIT
@@ -122,7 +121,6 @@
 #define CONFIG_SYS_SDRAM_SIZE 1024
 #define CONFIG_VERY_BIG_RAM
 
-#define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -138,7 +136,6 @@
 /*
  * Local Bus Definitions
  */
-#define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
 
 #define CONFIG_SYS_ELBC_BASE		0xe0000000
 #ifdef CONFIG_PHYS_64BIT
@@ -188,7 +185,6 @@
 
 #define CONFIG_PCA9698			/* NXP PCA9698 */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
@@ -202,13 +198,9 @@
 #define CONFIG_SF_DEFAULT_MODE		0
 #endif
 
-#define CONFIG_SHA1
-
 /*
  * MMC
  */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 
@@ -219,7 +211,6 @@
  */
 #define CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
-#define CONFIG_CMD_BMP
 
 /*
  * General PCI
@@ -297,7 +288,6 @@
 /*
  * USB
  */
-#define CONFIG_USB_EHCI
 
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI_FSL
@@ -351,21 +341,17 @@
 
 #ifndef CONFIG_TRAILBLAZER
 
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
 /*
  * Board initialisation callbacks
  */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
 #else /* CONFIG_TRAILBLAZER */
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
@@ -377,7 +363,6 @@
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_DOS_PARTITION
 
 /*
  * For booting Linux, the board info and command line data
@@ -392,9 +377,6 @@
  */
 
 #ifdef CONFIG_TRAILBLAZER
-
-#define CONFIG_BAUDRATE	115200
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"mp_holdoff=1\0"
 
@@ -407,9 +389,6 @@
 
 #define CONFIG_LOADADDR		1000000
 
-
-#define CONFIG_BAUDRATE	115200
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\