X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcontrolcenterd.h;h=29189a4336990d4a103c60ed90dfef2f47fc8117;hb=645176d1d5c37c91ddb06c366678fbe302550387;hp=600bb835cefca51fcaa26b2bfba3c1f2fbef58a3;hpb=588eec2a8603ee8a8e2e913895767c4c02d523af;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 600bb83..29189a4 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -26,10 +26,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #endif
@@ -45,7 +41,6 @@
 #define CONFIG_CONTROLCENTERD
 #define CONFIG_MP			/* support multiple processors */
 
-
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENABLE_36BIT_PHYS
 #define CONFIG_FSL_LAW			/* Use common FSL init code */
@@ -98,7 +93,6 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
-
 /*
  * Memory map
  *
@@ -178,7 +172,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		2
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -202,7 +195,6 @@
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 #ifndef CONFIG_TRAILBLAZER
-#define CONFIG_CMD_I2C
 #endif
 
 #define CONFIG_PCA9698			/* NXP PCA9698 */
@@ -216,11 +208,7 @@
  * eSPI - Enhanced SPI
  */
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
-
-#define CONFIG_SPI_FLASH_STMICRO
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
 #define CONFIG_SF_DEFAULT_MODE		0
 #endif
@@ -232,12 +220,10 @@
  */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
 
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 
-
 #ifndef CONFIG_TRAILBLAZER
 
 /*
@@ -255,7 +241,7 @@
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCI			/* Enable PCI/PCIE */
-#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
@@ -329,8 +315,6 @@
  * USB
  */
 #define CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI_FSL
@@ -368,7 +352,6 @@
  * Command line configuration.
  */
 #ifndef CONFIG_TRAILBLAZER
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
@@ -388,11 +371,7 @@
 #ifndef CONFIG_TRAILBLAZER
 
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 /*
@@ -403,17 +382,6 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 #else /* CONFIG_TRAILBLAZER */
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -444,7 +412,6 @@
 
 #ifdef CONFIG_TRAILBLAZER
 
-#define CONFIG_BOOTDELAY	0	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE	115200
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
@@ -459,7 +426,6 @@
 
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE	115200
 
@@ -476,7 +442,7 @@
 	"consoledev=ttyS1\0"					\
 	"ramdiskaddr=2000000\0"					\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
-	"fdtaddr=c00000\0"					\
+	"fdtaddr=1e00000\0"					\
 	"fdtfile=controlcenterd.dtb\0"				\
 	"bdev=sda3\0"