X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_vf.h;h=3711e429a70370fdc1042878b721d50707b816d8;hb=82975f8a9ec290b4cf2f9a228dd78761b35565ea;hp=1478ea844e17e43f75c5936957208a4d74e382a2;hpb=ce022f2857714e19c6b31a023b8145782ecef5a5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 1478ea8..3711e429 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -14,35 +14,20 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 #ifdef CONFIG_VIDEO_FSL_DCU_FB
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_SYS_FSL_DCU_LE
 
 #define CONFIG_SYS_DCU_ADDR		DCU0_BASE_ADDR
 #define DCU_LAYER_MAX_NUM		64
 #endif
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * SZ_1M)
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 /* NAND support */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 #define CONFIG_IPADDR		192.168.10.2
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_SERVERIP		192.168.10.1
 
-#define CONFIG_LOADADDR			0x80008000
 #define CONFIG_FDTADDR			0x84000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
@@ -51,8 +36,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"pxefile_addr_r=0x87100000\0" \
 	"ramdisk_addr_r=0x82100000\0" \
@@ -71,21 +54,6 @@
 	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define SD_BOOTCMD \
-	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0"	\
-	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-	"setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
-	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
-		"${soc}-colibri-${fdt_board}.dtb && " \
-	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"sdbootpart=1\0" \
-	"sddev=0\0" \
-	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-	"sdrootpart=2\0"
-
-
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 	"ubi.fm_autoconvert=1\0" \
@@ -97,9 +65,6 @@
 	"ubi read ${fdt_addr_r} dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define CONFIG_BOOTCOMMAND "run ubiboot; " \
-	"setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
@@ -114,7 +79,6 @@
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
-	SD_BOOTCMD \
 	UBI_BOOTCMD \
 	UBOOT_UPDATE \
 	"console=ttyLP0\0" \
@@ -122,7 +86,7 @@
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
-	"kernel_file=zImage\0" \
+	"kernel_image=zImage\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"setsdupdate=mmc rescan && set interface mmc && " \
 		"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
@@ -140,12 +104,6 @@
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_MEMTEST_START	0x80010000
-#define CONFIG_SYS_MEMTEST_END		0x87C00000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
 /* Physical memory map */
 #define PHYS_SDRAM			(0x80000000)
 #define PHYS_SDRAM_SIZE			(256 * SZ_1M)
@@ -169,6 +127,5 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 /* USB DFU */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
 
 #endif /* __CONFIG_H */