X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_t30.h;h=94802a66f7abf6ce856637ee0cf98cf43e9f8142;hb=5a1a8a63be8f7262a300eddafb18020926b12fb6;hp=bc1904418d53ec4e100d79024ced0d48938af69a;hpb=54925327fa11779112bfc947a0c0a0f30623bbc6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index bc19044..94802a6 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2013-2016 Stefan Agner
  *
  * Configuration settings for the Toradex Colibri T30 modules.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -14,40 +13,22 @@
 #include "tegra30-common.h"
 
 /* High-level configuration options */
-#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
 
-/* Board-specific serial config */
+/*
+ * Board-specific serial config
+ *
+ * Colibri UART-A: NVIDIA UARTA
+ * Colibri UART-B: NVIDIA UARTD
+ * Colibri UART-C: NVIDIA UARTB
+ */
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_T30
 
-/* I2C */
-#define CONFIG_SYS_I2C_TEGRA
-
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
-					 CONFIG_TDX_CFG_BLOCK_OFFSET)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_SYS_MMC_ENV_PART		1
-
-/* USB host support */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_TEGRA
-
-/* USB networking support */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-
 /* General networking support */
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE		16352
 #define CONFIG_TFTP_TSIZE
 
-/* Miscellaneous commands */
-#define CONFIG_FAT_WRITE
-
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_CBSIZE		1024
@@ -56,13 +37,21 @@
 #undef CONFIG_SYS_BARGSIZE
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
-/* Increase print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Increase maximum number of arguments */
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	UBOOT_UPDATE
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"