X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_t20.h;h=cd7e1687812c3cdcc338cdc07c132ecc456d62a8;hb=21bc1935b1a84176367af982f7f8da11c29cb2eb;hp=e141dfb99d2af66eb20bcf53e7c701c98a03279c;hpb=70b26cd057f42c7126088b49d4285955c8a00eae;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index e141dfb..cd7e168 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Lucas Stach
  *
  * Configuration settings for the Toradex Colibri T20 modules.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -11,75 +10,30 @@
 
 #include "tegra20-common.h"
 
-#define CONFIG_ARCH_MISC_INIT
-
-/* High-level configuration options */
-#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
-
 /* Board-specific serial config */
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_TEGRA_UARTA_SDIO1
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
-/* I2C */
-#define CONFIG_SYS_I2C_TEGRA
-
-/* SD/MMC support */
-#define CONFIG_GENERIC_MMC
-
-/* USB host support */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_TEGRA
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
-
-/* USB networking support */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_TEGRA2
 
 /* General networking support */
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE		1536
 #define CONFIG_TFTP_TSIZE
 
 /* LCD support */
-#define CONFIG_SYS_WHITE_ON_BLACK
-#define CONFIG_CMD_BMP
 #define CONFIG_LCD_LOGO
 
 /* NAND support */
-#define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nand0=tegra_nand"
-#define MTDPARTS_DEFAULT	"mtdparts=tegra_nand:"		\
-				"2m(u-boot)ro,"			\
-				"1m(u-boot-env),"		\
-				"1m(cfgblock)ro,"		\
-				"-(ubi)"
-
 /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		(SZ_2M)
 #undef CONFIG_ENV_SIZE		/* undef size from tegra20-common.h */
 #define CONFIG_ENV_SIZE			(SZ_64K)
 
-/* UBI */
-#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
-#define CONFIG_LZO
-#define CONFIG_RBTREE
-
-/* Debug commands */
-
-/* Miscellaneous commands */
-#define CONFIG_FAT_WRITE
-
 #define BOARD_EXTRA_ENV_SETTINGS \
-	"mtdparts=" MTDPARTS_DEFAULT "\0"
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
@@ -89,9 +43,6 @@
 #undef CONFIG_SYS_BARGSIZE
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
-/* Increase print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Increase maximum number of arguments */
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32