X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_t20.h;h=5c9df55828467c0010564039b2124f95223ad3e4;hb=8850c5d57c10aa6431d138d426e6e105c99cc7ba;hp=c17f245a17fe3faed8dd7b1c3590c5d5ee1fe64e;hpb=b491d9757d14415edcb1468ed896a704d0f0cfe7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index c17f245..5c9df55 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -1,6 +1,8 @@
 /*
  * Copyright (C) 2012 Lucas Stach
  *
+ * Configuration settings for the Toradex Colibri T20 modules.
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
@@ -10,59 +12,70 @@
 #include "tegra20-common.h"
 
 /* High-level configuration options */
-#define V_PROMPT			"Colibri T20 # "
-#define CONFIG_TEGRA_BOARD_STRING	"Toradex Colibri T20"
+#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_TEGRA_UARTA_SDIO1
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_T20
+#define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_TEGRA2
 
-/* SD/MMC support */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA_MMC
-#define CONFIG_CMD_MMC
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
 
 /* USB host support */
-#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_EHCI_TEGRA
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
 
 /* USB networking support */
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 
 /* General networking support */
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE		1536
+#define CONFIG_TFTP_TSIZE
+
+/* LCD support */
+#define CONFIG_LCD_LOGO
 
 /* NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define MTDIDS_DEFAULT		"nand0=tegra_nand"
+#define MTDPARTS_DEFAULT	"mtdparts=tegra_nand:"		\
+				"2m(u-boot)ro,"			\
+				"1m(u-boot-env),"		\
+				"1m(cfgblock)ro,"		\
+				"-(ubi)"
 
 /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              (SZ_2M)
-#undef  CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
-#define CONFIG_ENV_SIZE                (SZ_64K)
+#define CONFIG_ENV_OFFSET		(SZ_2M)
+#undef CONFIG_ENV_SIZE		/* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE			(SZ_64K)
+
+/* UBI */
+#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
+#define CONFIG_LZO
+#define CONFIG_RBTREE
 
 /* Debug commands */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CACHE
 
 /* Miscellaneous commands */
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_FAT_WRITE
 
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"mtdparts=" MTDPARTS_DEFAULT "\0"
+
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_CBSIZE		1024