X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_pxa270.h;h=ca57f54157487473af9ad094ef202860db3bfb81;hb=0154e6de37e8bbaac837939391f6d4a8f0b3fd18;hp=4686b8946e3d1dccbdf39177827f6a5db828d630;hpb=e91907a1464e5b79673c37f46dcb76d3c5b7c0c7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 4686b89..ca57f54 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -12,25 +12,12 @@
 /*
  * High Level Board Configuration Options
  */
-#define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
 /* Avoid overwriting factory configuration block */
 #define CONFIG_BOARD_SIZE_LIMIT		0x40000
 
 /*
  * Environment settings
  */
-#define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
-#define	CONFIG_BOOTCOMMAND						\
-	"if fatload mmc 0 0xa0000000 uImage; then "			\
-		"bootm 0xa0000000; "					\
-	"fi; "								\
-	"if usb reset && fatload usb 0 0xa0000000 uImage; then "	\
-		"bootm 0xa0000000; "					\
-	"fi; "								\
-	"bootm 0xc0000;"
-#define	CONFIG_TIMESTAMP
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
 
 /*
  * Serial Console Configuration
@@ -41,18 +28,16 @@
  */
 
 /* I2C support */
-#ifdef CONFIG_SYS_I2C
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 #define CONFIG_SYS_I2C_PXA
 #define CONFIG_PXA_STD_I2C
 #define CONFIG_PXA_PWR_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
 #endif
 
 /* LCD support */
 #ifdef CONFIG_LCD
 #define CONFIG_PXA_LCD
 #define CONFIG_PXA_VGA
-#define CONFIG_LCD_LOGO
 #endif
 
 /*
@@ -60,17 +45,11 @@
  */
 #ifdef	CONFIG_CMD_NET
 
-#define	CONFIG_DRIVER_DM9000		1
 #define CONFIG_DM9000_BASE		0x08000000
 #define DM9000_IO			(CONFIG_DM9000_BASE)
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
-#define	CONFIG_NET_RETRY_COUNT		10
-
-#define	CONFIG_BOOTP_BOOTFILESIZE
 #endif
 
-#define	CONFIG_SYS_DEVICE_NULLDEV	1
-
 /*
  * Clock Configuration
  */
@@ -85,7 +64,6 @@
 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
 #define	CONFIG_SYS_DRAM_SIZE		0x04000000	/* 64 MB DRAM */
 
-#define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
 
@@ -100,7 +78,6 @@
 #define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 
 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
-#define	CONFIG_SYS_MAX_FLASH_BANKS	1
 
 #define	CONFIG_SYS_FLASH_ERASE_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25 * CONFIG_SYS_HZ)
@@ -108,7 +85,6 @@
 #define	CONFIG_SYS_FLASH_UNLOCK_TOUT	(25 * CONFIG_SYS_HZ)
 #endif
 
-#define	CONFIG_SYS_MONITOR_BASE		0x0
 #define	CONFIG_SYS_MONITOR_LEN		0x40000
 
 /* Skip factory configuration block */