X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_pxa270.h;h=3dedcdaad28d72100156aa86e4b8935d11e20267;hb=d584648dad691caec3ecc7777dbfa3f1936878e5;hp=31eb5e9b9a44d8b164e84ffdcff4269f639e23da;hpb=ce4f2dbe1a066a42a995c6f48280e2e1a5df1c92;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 31eb5e9..3dedcda 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Toradex Colibri PXA270 configuration file
  *
  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2015 Marcel Ziswiler <marcel@ziswiler.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
+ * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
  */
 
 #ifndef	__CONFIG_H
@@ -14,19 +13,13 @@
  * High Level Board Configuration Options
  */
 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
-#define	CONFIG_SYS_TEXT_BASE		0x0
 /* Avoid overwriting factory configuration block */
 #define CONFIG_BOARD_SIZE_LIMIT		0x40000
 
-/* We will never enable dcache because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
 /*
  * Environment settings
  */
-#define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
-#define	CONFIG_ARCH_CPU_INIT
 #define	CONFIG_BOOTCOMMAND						\
 	"if fatload mmc 0 0xa0000000 uImage; then "			\
 		"bootm 0xa0000000; "					\
@@ -35,7 +28,6 @@
 		"bootm 0xa0000000; "					\
 	"fi; "								\
 	"bootm 0xc0000;"
-#define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
 #define	CONFIG_TIMESTAMP
 #define	CONFIG_CMDLINE_TAG
 #define	CONFIG_SETUP_MEMORY_TAGS
@@ -43,12 +35,10 @@
 /*
  * Serial Console Configuration
  */
-#define	CONFIG_BAUDRATE			115200
 
 /*
  * Bootloader Components Configuration
  */
-#define	CONFIG_CMD_ENV
 
 /* I2C support */
 #ifdef CONFIG_SYS_I2C
@@ -62,8 +52,6 @@
 #ifdef CONFIG_LCD
 #define CONFIG_PXA_LCD
 #define CONFIG_PXA_VGA
-#define CONFIG_SYS_WHITE_ON_BLACK
-#define CONFIG_CMD_BMP
 #define CONFIG_LCD_LOGO
 #endif
 
@@ -79,21 +67,8 @@
 #define	CONFIG_NET_RETRY_COUNT		10
 
 #define	CONFIG_BOOTP_BOOTFILESIZE
-#define	CONFIG_BOOTP_BOOTPATH
-#define	CONFIG_BOOTP_GATEWAY
-#define	CONFIG_BOOTP_HOSTNAME
 #endif
 
-#undef	CONFIG_SYS_LONGHELP		/* Saves 10 KB */
-#define	CONFIG_SYS_CBSIZE		256
-#define	CONFIG_SYS_PBSIZE		\
-	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define	CONFIG_SYS_MAXARGS		16
-#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define	CONFIG_SYS_DEVICE_NULLDEV	1
-#undef	CONFIG_CMDLINE_EDITING		/* Saves 2.5 KB */
-#undef	CONFIG_AUTO_COMPLETE		/* Saves 2.5 KB */
-
 /*
  * Clock Configuration
  */
@@ -102,16 +77,12 @@
 /*
  * DRAM Map
  */
-#define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
 #define	PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
 
 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
 #define	CONFIG_SYS_DRAM_SIZE		0x04000000	/* 64 MB DRAM */
 
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
-
 #define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
@@ -124,8 +95,6 @@
 #define	PHYS_FLASH_SIZE			0x02000000	/* 32 MB */
 #define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
-#define	CONFIG_SYS_FLASH_CFI
-#define	CONFIG_FLASH_CFI_DRIVER		1
 #define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 
 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
@@ -135,25 +104,12 @@
 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_LOCK_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_UNLOCK_TOUT	(25 * CONFIG_SYS_HZ)
-
-#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-#define	CONFIG_SYS_FLASH_PROTECTION		1
-
-#define CONFIG_ENV_IS_IN_FLASH		1
-
-#else	/* No flash */
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define	CONFIG_SYS_MONITOR_BASE		0x0
 #define	CONFIG_SYS_MONITOR_LEN		0x40000
 
 /* Skip factory configuration block */
-#define	CONFIG_ENV_ADDR			\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
-#define	CONFIG_ENV_SIZE			0x40000
-#define	CONFIG_ENV_SECT_SIZE		0x40000
 
 /*
  * GPIO settings