X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_pxa270.h;h=0a91784ccf95c54e80445b78e4233e256f0982c8;hb=e2e5eec6ce1c2cb496a2a5e019a175a9fbdbed2a;hp=587963963adf5af8e682b9521bb92b5422074766;hpb=be62fbf376261ab3a4ed5db3bf54d5df9e216d9f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 5879639..0a91784 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Toradex Colibri PXA270 configuration file
  *
  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
  * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef	__CONFIG_H
@@ -14,23 +13,12 @@
  * High Level Board Configuration Options
  */
 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
-#define	CONFIG_SYS_TEXT_BASE		0x0
 /* Avoid overwriting factory configuration block */
 #define CONFIG_BOARD_SIZE_LIMIT		0x40000
 
-/* We will never enable dcache because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
-
 /*
  * Environment settings
  */
-#define	CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
-#define	CONFIG_ARCH_CPU_INIT
 #define	CONFIG_BOOTCOMMAND						\
 	"if fatload mmc 0 0xa0000000 uImage; then "			\
 		"bootm 0xa0000000; "					\
@@ -39,7 +27,6 @@
 		"bootm 0xa0000000; "					\
 	"fi; "								\
 	"bootm 0xc0000;"
-#define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
 #define	CONFIG_TIMESTAMP
 #define	CONFIG_CMDLINE_TAG
 #define	CONFIG_SETUP_MEMORY_TAGS
@@ -53,11 +40,10 @@
  */
 
 /* I2C support */
-#ifdef CONFIG_SYS_I2C
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 #define CONFIG_SYS_I2C_PXA
 #define CONFIG_PXA_STD_I2C
 #define CONFIG_PXA_PWR_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
 #endif
 
 /* LCD support */
@@ -79,21 +65,8 @@
 #define	CONFIG_NET_RETRY_COUNT		10
 
 #define	CONFIG_BOOTP_BOOTFILESIZE
-#define	CONFIG_BOOTP_BOOTPATH
-#define	CONFIG_BOOTP_GATEWAY
-#define	CONFIG_BOOTP_HOSTNAME
 #endif
 
-#undef	CONFIG_SYS_LONGHELP		/* Saves 10 KB */
-#define	CONFIG_SYS_CBSIZE		256
-#define	CONFIG_SYS_PBSIZE		\
-	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define	CONFIG_SYS_MAXARGS		16
-#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define	CONFIG_SYS_DEVICE_NULLDEV	1
-#undef	CONFIG_CMDLINE_EDITING		/* Saves 2.5 KB */
-#undef	CONFIG_AUTO_COMPLETE		/* Saves 2.5 KB */
-
 /*
  * Clock Configuration
  */
@@ -102,17 +75,12 @@
 /*
  * DRAM Map
  */
-#define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
 #define	PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
 
 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
 #define	CONFIG_SYS_DRAM_SIZE		0x04000000	/* 64 MB DRAM */
 
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
-
-#define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
 
@@ -124,8 +92,6 @@
 #define	PHYS_FLASH_SIZE			0x02000000	/* 32 MB */
 #define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
-#define	CONFIG_SYS_FLASH_CFI
-#define	CONFIG_FLASH_CFI_DRIVER		1
 #define	CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 
 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
@@ -135,24 +101,12 @@
 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_LOCK_TOUT	(25 * CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_UNLOCK_TOUT	(25 * CONFIG_SYS_HZ)
-
-#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-#define	CONFIG_SYS_FLASH_PROTECTION		1
-
-#define CONFIG_ENV_IS_IN_FLASH		1
-
-#else	/* No flash */
-#define	CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define	CONFIG_SYS_MONITOR_BASE		0x0
 #define	CONFIG_SYS_MONITOR_LEN		0x40000
 
 /* Skip factory configuration block */
-#define	CONFIG_ENV_ADDR			\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
-#define	CONFIG_ENV_SIZE			0x40000
-#define	CONFIG_ENV_SECT_SIZE		0x40000
 
 /*
  * GPIO settings