X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_imx7.h;h=f9bf849ae9804a3fb2f0d01fa748b22f722ffb10;hb=aec118ebe63f7f0ab60916f9906fb3cb680abf7a;hp=ac188ee3ac650307a8c6fac1ffbef93b69543957;hpb=2ffa0e87df3a7595f71d05782924ee83146d9fe7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index ac188ee..f9bf849 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -14,11 +14,11 @@
 #include "mx7_common.h"
 
 /* MMC Config*/
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_ESDHC_ADDR	0
 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
-#define CONFIG_SYS_FSL_USDHC_NUM	1
+#define CFG_SYS_FSL_USDHC_NUM	1
 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
-#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CFG_SYS_FSL_USDHC_NUM	2
 #endif
 
 #define CONFIG_IPADDR			192.168.10.2
@@ -83,20 +83,11 @@
 
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
-	"fdt_addr_r=0x82000000\0" \
-	"kernel_addr_r=0x81000000\0" \
-	"pxefile_addr_r=0x87100000\0" \
-	"ramdisk_addr_r=0x82100000\0" \
-	"scriptaddr=0x87000000\0"
-
-#define NFS_BOOTCMD \
-	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
-	"nfsboot=run setup; " \
-		"setenv bootargs ${defargs} ${nfsargs} " \
-		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
-		"dhcp ${kernel_addr_r} && " \
-		"tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
-		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"fdt_addr_r=0x88200000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"pxefile_addr_r=0x88300000\0" \
+	"ramdisk_addr_r=0x88400000\0" \
+	"scriptaddr=0x88280000\0"
 
 #define UBI_BOOTCMD	\
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
@@ -110,10 +101,7 @@
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
-#define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
-	"run distro_bootcmd;"
 #define MODULE_EXTRA_ENV_SETTINGS \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	UBI_BOOTCMD
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
 #define MODULE_EXTRA_ENV_SETTINGS \
@@ -138,11 +126,10 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
-	NFS_BOOTCMD \
 	MODULE_EXTRA_ENV_SETTINGS \
 	UBOOT_UPDATE \
 	"boot_file=zImage\0" \
-	"bootubipart=ubi\0" \
+	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
 	"defargs=\0" \
 	"fdt_board=eval-v3\0" \
@@ -177,30 +164,16 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
 /* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
+#define CFG_SYS_NAND_BASE		0x40000000
 #endif
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
 #define CONFIG_USBD_HS
 
-#if defined(CONFIG_DM_VIDEO)
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-
 #endif