X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_imx7.h;h=3388a95ed3dab843551cae305cc25b6ee06ae6cb;hb=21c729799104605f2e4fa976af2f97ed8e258afc;hp=e91130378824859532c555244fac062113bf8413;hpb=6828e602b722d1137d17ca0d25a451c7743c2770;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index e911303..3388a95 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -14,27 +14,17 @@
 
 #include "mx7_common.h"
 
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
-
 /*#define CONFIG_DBG_MONITOR*/
 #define PHYS_SDRAM_SIZE			SZ_512M
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
 
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE			0x4000
-
-#define CONFIG_CMD_BMODE
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -44,9 +34,9 @@
 
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
-#define CONFIG_TFTP_TSIZE
 #define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE		16384
+#define CONFIG_TFTP_BLOCKSIZE		16352
+#define CONFIG_TFTP_TSIZE
 
 /* ENET1 */
 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
@@ -59,9 +49,7 @@
 #undef CONFIG_BOOTM_RTEMS
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
 #define CONFIG_IPADDR			192.168.10.2
@@ -69,6 +57,7 @@
 #define CONFIG_SERVERIP			192.168.10.1
 
 #define MEM_LAYOUT_ENV_SETTINGS \
+	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
@@ -127,13 +116,14 @@
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"setup=setenv setupargs " \
 		"console=tty1 console=${console}" \
-		",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
+		",${baudrate}n8 ${memargs} consoleblank=0\0" \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
 	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
+	"updlevel=2\0"
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
@@ -144,8 +134,6 @@
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_STACKSIZE		SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -159,8 +147,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* environment organization */
 #define CONFIG_ENV_IS_IN_NAND
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
@@ -169,8 +156,8 @@
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #elif defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_OFFSET		(4 * 1024 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_OFFSET		(28 * CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
 #endif
 
@@ -197,7 +184,8 @@
 #define MTDIDS_DEFAULT		"nand0=gpmi-nand"
 #define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:"		\
 				"512k(mx7-bcb),"		\
-				"3584k(u-boot)ro,"		\
+				"1536k(u-boot1)ro,"		\
+				"1536k(u-boot2)ro,"		\
 				"512k(u-boot-env),"		\
 				"-(ubi)"
 
@@ -223,17 +211,11 @@
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO