X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_imx6.h;h=44135b2f2147a8f223e0fa89706df1cfdffac945;hb=8bef03683623d6a7adfff1f859ed44fad9e92ed7;hp=3d3f31369da6c67909593c1a6e2abe7b89048978;hpb=621e09cb3bf7e6d4fce9dd5e6de97e057adebc3a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 3d3f313..44135b2 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -21,26 +21,8 @@
 #include "imx6_spl.h"
 #endif
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SERIAL_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_MXC_I2C3_SPEED	400000
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
@@ -56,18 +38,11 @@
 
 /* Framebuffer and LCD */
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 /* Command definition */
 
 #undef CONFIG_IPADDR
@@ -76,11 +51,8 @@
 #undef CONFIG_SERVERIP
 #define CONFIG_SERVERIP			192.168.10.1
 
-#define CONFIG_LOADADDR			0x12000000
-
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
@@ -124,7 +96,7 @@
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
+	"bootcmd=run distro_bootcmd; " \
 		"usb start ; " \
 		"setenv stdout serial,vidconsole; " \
 		"setenv stdin serial,usbkbd\0" \
@@ -132,6 +104,7 @@
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 	"fdt_file=" FDT_FILE "\0" \
+	"fdtfile=" FDT_FILE "\0" \
 	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
@@ -150,9 +123,8 @@
 		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
-	"splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
-	"vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
-		"video=mxcfb1:off fbmem=8M\0 "
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"vidargs=fbmem=8M\0"
 
 /* Miscellaneous configurable options */
 #undef CONFIG_SYS_CBSIZE
@@ -160,8 +132,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		48
 
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
@@ -174,12 +144,4 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* environment organization */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_SYS_MMC_ENV_PART		1
-#endif
-
 #endif	/* __CONFIG_H */