X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri-imx6ull.h;h=d95c838eeb97cde5cc8abdc89a6255bd28641f48;hb=7cfbba36e9f84312afe8cd6d12db4e9e9c1e04b5;hp=736717486bffb85d83fe7503df066940184653c1;hpb=d22c8be964a870f59d2fdab6c67cefa0c4799364;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 7367174..d95c838 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -15,12 +15,6 @@
 
 #define PHYS_SDRAM_SIZE			SZ_512M
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
-
-/* Network */
-#define CONFIG_TFTP_TSIZE
-
 /* ENET1 */
 #define IMX_FEC_BASE			ENET2_BASE_ADDR
 
@@ -28,63 +22,46 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
-/* I2C configs */
-#define CONFIG_SYS_I2C_SPEED		100000
-
 #define CONFIG_IPADDR			192.168.10.2
 #define CONFIG_NETMASK			255.255.255.0
 #define CONFIG_SERVERIP			192.168.10.1
 
-#define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82100000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"pxefile_addr_r=0x87100000\0" \
 	"ramdisk_addr_r=0x82200000\0" \
 	"scriptaddr=0x87000000\0"
 
+#define UBOOT_UPDATE \
+	"update_uboot=nand erase.part u-boot1 && " \
+		"nand write ${loadaddr} u-boot1 ${filesize} && " \
+		"nand erase.part u-boot2 && " \
+		"nand write ${loadaddr} u-boot2 ${filesize}\0"
+
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 	"nfsboot=run setup; " \
 		"setenv bootargs ${defargs} ${nfsargs} " \
 		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
 		"dhcp ${kernel_addr_r} && " \
-		"tftp ${fdt_addr_r} " FDT_FILE " && " \
+		"tftp ${fdt_addr_r} ${fdtfile} && " \
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define SD_BOOTCMD \
-	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
-	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-	"setenv bootargs ${defargs} ${sdargs} " \
-	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && " \
-	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"sdbootpart=1\0" \
-	"sddev=0\0" \
-	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-	"sdrootpart=2\0"
-
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
 		"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
 		"setenv bootargs ${defargs} ${ubiargs} " \
-		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
+		"${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
 		"ubi part ubi &&" \
 		"ubi read ${kernel_addr_r} kernel && " \
 		"ubi read ${fdt_addr_r} dtb && " \
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define CONFIG_BOOTCOMMAND "run ubiboot; " \
-	"setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
+/* Run Distro Boot script if ubiboot fails */
+#define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;"
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
@@ -98,8 +75,9 @@
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
-	SD_BOOTCMD \
 	UBI_BOOTCMD \
+	UBOOT_UPDATE \
+	"bootubipart=ubi\0" \
 	"console=ttymxc0\0" \
 	"defargs=user_debug=30\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
@@ -122,13 +100,10 @@
 		"fatload ${interface} 0:1 ${loadaddr} " \
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 	"vidargs=video=mxsfb:640x480M-16@60"
 
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x08000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -142,12 +117,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
-#define CONFIG_ENV_OFFSET		(28 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
-#endif
-
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
@@ -161,22 +130,15 @@
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#define CONFIG_IMX_THERMAL
-
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 
 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 #define CONFIG_VIDEO_MXS
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
 #endif