X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri-imx6ull.h;h=d95c838eeb97cde5cc8abdc89a6255bd28641f48;hb=7cfbba36e9f84312afe8cd6d12db4e9e9c1e04b5;hp=63b3fef34c5793e788d6eedbc556c6495955dad8;hpb=2512b3b88ba6b193c3cada7e29e386613e8f9a6b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 63b3fef..d95c838 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -15,12 +15,6 @@
 
 #define PHYS_SDRAM_SIZE			SZ_512M
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
-
-/* Network */
-#define CONFIG_TFTP_TSIZE
-
 /* ENET1 */
 #define IMX_FEC_BASE			ENET2_BASE_ADDR
 
@@ -28,9 +22,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 
-/* I2C configs */
-#define CONFIG_SYS_I2C_SPEED		100000
-
 #define CONFIG_IPADDR			192.168.10.2
 #define CONFIG_NETMASK			255.255.255.0
 #define CONFIG_SERVERIP			192.168.10.1
@@ -63,7 +54,7 @@
 		"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
 		"setenv bootargs ${defargs} ${ubiargs} " \
-		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
+		"${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
 		"ubi part ubi &&" \
 		"ubi read ${kernel_addr_r} kernel && " \
 		"ubi read ${fdt_addr_r} dtb && " \
@@ -109,11 +100,10 @@
 		"fatload ${interface} 0:1 ${loadaddr} " \
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
-	"splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 	"vidargs=video=mxsfb:640x480M-16@60"
 
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -140,20 +130,15 @@
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#define CONFIG_IMX_THERMAL
-
 #define CONFIG_USBD_HS
 
 /* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT	300
 
 #if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
 #define CONFIG_VIDEO_MXS
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
 #endif