X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri-imx6ull.h;h=561a61ebc03c532711469eb3e199b28dcf4c3027;hb=HEAD;hp=afe8badd6502fa5c6f5e5051ade4e742ef476c2b;hpb=4e5909450ec2acafb3d2e5b9714251ae67e0f0e0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index afe8bad..561a61e 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -11,7 +11,6 @@
 #define __COLIBRI_IMX6ULL_CONFIG_H
 
 #include "mx6_common.h"
-#define CONFIG_IOMUX_LPSR
 
 #define PHYS_SDRAM_SIZE			SZ_1G
 
@@ -21,10 +20,6 @@
 #define CFG_SYS_FSL_ESDHC_ADDR	0
 #define CFG_SYS_FSL_USDHC_NUM	1
 
-#define CONFIG_IPADDR			192.168.10.2
-#define CONFIG_NETMASK			255.255.255.0
-#define CONFIG_SERVERIP			192.168.10.1
-
 #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC)
 #define UBOOT_UPDATE \
 	"uboot_hwpart=1\0" \
@@ -84,7 +79,7 @@
 #endif
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	UBI_BOOTCMD \
@@ -104,7 +99,7 @@
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"setup=setenv setupargs " \
 		"console=tty1 console=${console}" \
-		",${baudrate}n8 ${memargs} consoleblank=0\0" \
+		",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
@@ -116,9 +111,9 @@
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
 #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
 /* NAND stuff */
@@ -128,10 +123,8 @@
 
 /* USB Configs */
 
-#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-
-#define CONFIG_USBD_HS
+#define CFG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS		0
 
 /* USB Device Firmware Update support */
 #define DFU_DEFAULT_POLL_TIMEOUT	300