X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcobra5272.h;h=c926e6ac8ca2bc23761e93de14ed37a6158ee00f;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=fe23c2396c9f9ce43b92ddba1b37f3931793628a;hpb=ea02cfb6495eb5f54bf239405316746a19d303b2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index fe23c23..c926e6a 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -32,9 +32,6 @@
 #define CONFIG_SYS_CLK			66000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
 
-/* Enable Dma Timer */
-#define CONFIG_MCFTMR
-
 /* ---
  * Define baudrate for UART1 (console output, tftp, ...)
  * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
@@ -43,7 +40,6 @@
  * ---
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
 /* ---
@@ -55,7 +51,6 @@
  */
 
 #if 0
-#define CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
 #endif
 
@@ -90,28 +85,12 @@
 	. = DEFINED(env_offset) ? env_offset : .; \
 	env/embedded.o(.text);
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
@@ -129,7 +108,6 @@ u-boot: 'set' command */
 
 #if 0
 
-#define CONFIG_BOOTCOMMAND	"bootm 0xffe80000"	/*Autoboto command, please
 enter a valid image address in flash */
 
 /* User network settings */
@@ -139,9 +117,6 @@ enter a valid image address in flash */
 
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR		0x20000		/*Defines default RAM address
-from which user programs will be started */
-
 /*---*/
 
 /*
@@ -190,8 +165,6 @@ from which user programs will be started */
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in internal SRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -214,15 +187,7 @@ from which user programs will be started */
 
 #define CONFIG_SYS_FLASH_BASE		0xffe00000
 
-#ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -234,14 +199,12 @@ from which user programs will be started */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip	*/
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000	/* flash timeout */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
@@ -257,36 +220,6 @@ from which user programs will be started */
 					 CF_CACR_EUSP)
 
 /*-----------------------------------------------------------------------
- * Memory bank definitions
- *
- * Please refer also to Motorola Coldfire user manual - Chapter XXX
- * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf>
- */
-#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
-
-#define CONFIG_SYS_BR1_PRELIM		0
-#define CONFIG_SYS_OR1_PRELIM		0
-
-#define CONFIG_SYS_BR2_PRELIM		0
-#define CONFIG_SYS_OR2_PRELIM		0
-
-#define CONFIG_SYS_BR3_PRELIM		0
-#define CONFIG_SYS_OR3_PRELIM		0
-
-#define CONFIG_SYS_BR4_PRELIM		0
-#define CONFIG_SYS_OR4_PRELIM		0
-
-#define CONFIG_SYS_BR5_PRELIM		0
-#define CONFIG_SYS_OR5_PRELIM		0
-
-#define CONFIG_SYS_BR6_PRELIM		0
-#define CONFIG_SYS_OR6_PRELIM		0
-
-#define CONFIG_SYS_BR7_PRELIM		0x00000701
-#define CONFIG_SYS_OR7_PRELIM		0xFF00007C
-
-/*-----------------------------------------------------------------------
  * LED config
  */
 #define	LED_STAT_0	0xffff /*all LEDs off*/