X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcobra5272.h;h=ba0662f1f40e1abe472faae77c24b45ce1fe8d2d;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=efc6b5bd1be069ed689c889ec6e45bfc67790799;hpb=7cfbba36e9f84312afe8cd6d12db4e9e9c1e04b5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index efc6b5b..ba0662f 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -32,9 +32,6 @@
 #define CONFIG_SYS_CLK			66000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
 
-/* Enable Dma Timer */
-#define CONFIG_MCFTMR
-
 /* ---
  * Define baudrate for UART1 (console output, tftp, ...)
  * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
@@ -43,7 +40,6 @@
  * ---
  */
 
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
 /* ---
@@ -55,7 +51,6 @@
  */
 
 #if 0
-#define CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT 10000	/* timeout in milliseconds */
 #endif
 
@@ -91,27 +86,6 @@
 	env/embedded.o(.text);
 
 /*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
-#	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CONFIG_SYS_DISCOVER_PHY
-#		define FECDUPLEX	FULL
-#		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
-#	endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-/*
  *-----------------------------------------------------------------------------
  * Define user parameters that have to be customized most likely
  *-----------------------------------------------------------------------------
@@ -125,7 +99,6 @@ u-boot: 'set' command */
 
 #if 0
 
-#define CONFIG_BOOTCOMMAND	"bootm 0xffe80000"	/*Autoboto command, please
 enter a valid image address in flash */
 
 /* User network settings */
@@ -170,21 +143,11 @@ enter a valid image address in flash */
 #define CONFIG_SYS_SCR			0x0003
 #define CONFIG_SYS_SPR			0xffff
 
-/* ---
- * Ethernet settings
- * ---
- */
-
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_ENET_BD_BASE	0x780000
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in internal SRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in internal SRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -207,14 +170,7 @@ enter a valid image address in flash */
 
 #define CONFIG_SYS_FLASH_BASE		0xffe00000
 
-#ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
 #define CONFIG_SYS_MONITOR_LEN		0x20000
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 
 /*
  * For booting Linux, the board info and command line data
@@ -224,13 +180,6 @@ enter a valid image address in flash */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip	*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT	1000	/* flash timeout */
-
-/*-----------------------------------------------------------------------
  * Cache Configuration
  */
 
@@ -248,36 +197,6 @@ enter a valid image address in flash */
 					 CF_CACR_EUSP)
 
 /*-----------------------------------------------------------------------
- * Memory bank definitions
- *
- * Please refer also to Motorola Coldfire user manual - Chapter XXX
- * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf>
- */
-#define CONFIG_SYS_BR0_PRELIM		0xFFE00201
-#define CONFIG_SYS_OR0_PRELIM		0xFFE00014
-
-#define CONFIG_SYS_BR1_PRELIM		0
-#define CONFIG_SYS_OR1_PRELIM		0
-
-#define CONFIG_SYS_BR2_PRELIM		0
-#define CONFIG_SYS_OR2_PRELIM		0
-
-#define CONFIG_SYS_BR3_PRELIM		0
-#define CONFIG_SYS_OR3_PRELIM		0
-
-#define CONFIG_SYS_BR4_PRELIM		0
-#define CONFIG_SYS_OR4_PRELIM		0
-
-#define CONFIG_SYS_BR5_PRELIM		0
-#define CONFIG_SYS_OR5_PRELIM		0
-
-#define CONFIG_SYS_BR6_PRELIM		0
-#define CONFIG_SYS_OR6_PRELIM		0
-
-#define CONFIG_SYS_BR7_PRELIM		0x00000701
-#define CONFIG_SYS_OR7_PRELIM		0xFF00007C
-
-/*-----------------------------------------------------------------------
  * LED config
  */
 #define	LED_STAT_0	0xffff /*all LEDs off*/