X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcobra5272.h;h=a9f5e5e8a550f69b76d7439d749808bfe2855836;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=0e8d4ac38bb371cf96cf77cad534ba52b9eb369c;hpb=2313d48445e59f063ec9a3b4940fe8252737db76;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 0e8d4ac..a9f5e5e 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Sentec Cobra Board.
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /* ---
@@ -33,12 +32,6 @@
 #define CONFIG_SYS_CLK			66000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
 
-/* ---
- * Enable use of Ethernet
- * ---
- */
-#define CONFIG_MCFFEC
-
 /* Enable Dma Timer */
 #define CONFIG_MCFTMR
 
@@ -52,7 +45,6 @@
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE		19200
 
 /* ---
  * set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change
@@ -94,42 +86,24 @@
  * ---
  */
 
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#else
-#define CONFIG_ENV_ADDR		0xffe04000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#endif
-
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text);
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII		1
 #	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
 #	define CONFIG_SYS_RX_ETH_BUFFER	8
 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#	define CONFIG_SYS_FEC0_PINMUX		0
-#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
-#	define MCFFEC_TOUT_LOOP		50000
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
@@ -158,9 +132,6 @@ u-boot: 'set' command */
 #define CONFIG_BOOTCOMMAND	"bootm 0xffe80000"	/*Autoboto command, please
 enter a valid image address in flash */
 
-#define CONFIG_BOOTARGS		" "			/* default bootargs that are
-considered during boot */
-
 /* User network settings */
 
 #define CONFIG_IPADDR 192.168.100.2		/* default board IP address */
@@ -173,17 +144,6 @@ from which user programs will be started */
 
 /*---*/
 
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
 /*
  *-----------------------------------------------------------------------------
  * End of user parameters to be customized