X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcobra5272.h;h=9b729acf8edfde1cdd1bb209b2e4d45944d82cf6;hb=0e8d158664a913392cb01fb11a948d83f72e105e;hp=510524ad36a12ffdf99d5a50cdc5c7209d540c18;hpb=80ff4f99b84b64edca3fd10da365ec1493be1c95;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 510524a..9b729ac 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -65,8 +65,10 @@
  * Enable use of Ethernet
  * ---
  */
+#define CONFIG_MCFFEC
 
-#define FEC_ENET
+/* Enable Dma Timer */
+#define CONFIG_MCFTMR
 
 /* ---
  * Define baudrate for UART1 (console output, tftp, ...)
@@ -76,6 +78,8 @@
  * ---
  */
 
+#define CONFIG_MCFUART
+#define CFG_UART_PORT		(0)
 #define CONFIG_BAUDRATE		19200
 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
@@ -97,7 +101,7 @@
  * bootloader residing in flash ('chainloading'); if you want to use
  * chainloading or want to compile a u-boot binary that can be loaded into
  * RAM via BDM set
- * 	"#if 0" to "#if 1"
+ *	"#if 0" to "#if 1"
  * You will need a first stage bootloader then, e. g. colilo or a working BDM
  * cable (Background Debug Mode)
  *
@@ -120,14 +124,14 @@
  */
 
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_IS_EMBEDDED	1
+#define CONFIG_ENV_OFFSET		0x4000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_EMBEDDED	1
 #else
-#define CFG_ENV_ADDR		0xffe04000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0xffe04000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_IS_IN_FLASH	1
 #endif
 
 
@@ -151,6 +155,27 @@
 #undef CONFIG_CMD_LOADB
 #undef CONFIG_CMD_MII
 
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CONFIG_MII_INIT		1
+#	define CFG_DISCOVER_PHY
+#	define CFG_RX_ETH_BUFFER	8
+#	define CFG_FAULT_ECHO_LINK_DOWN
+
+#	define CFG_FEC0_PINMUX		0
+#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define MCFFEC_TOUT_LOOP		50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CFG_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CFG_FAULT_ECHO_LINK_DOWN
+#			define CFG_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CFG_DISCOVER_PHY */
+#endif
 
 /*
  *-----------------------------------------------------------------------------