X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcobra5272.h;h=898ca968c9d4c4c7b0d0d6ac12fefc4b2957af57;hb=e9dcd5b40236b82672117464564d38511f1f7a0b;hp=9adf7a35f0ed32227dfab9eb8332b18a64922aa9;hpb=5619295995e3262bb5770e8b5e945ffdc5442145;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 9adf7a3..898ca96 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Configuation settings for the Sentec Cobra Board. * * (C) Copyright 2003 Josef Baumgartner - * - * SPDX-License-Identifier: GPL-2.0+ */ /* --- @@ -34,15 +33,6 @@ #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ /* --- - * Enable use of Ethernet - * --- - */ -#define CONFIG_MCFFEC - -/* Enable Dma Timer */ -#define CONFIG_MCFTMR - -/* --- * Define baudrate for UART1 (console output, tftp, ...) * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected in u-boot command @@ -50,7 +40,6 @@ * --- */ -#define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) /* --- @@ -62,7 +51,6 @@ */ #if 0 -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #endif @@ -77,7 +65,7 @@ * * Setting #if 0: u-boot will start from flash and relocate itself to RAM * - * Please do not forget to modify the setting of CONFIG_SYS_TEXT_BASE + * Please do not forget to modify the setting of CONFIG_TEXT_BASE * in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000) * * --- @@ -93,52 +81,11 @@ * --- */ -#ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#else -#define CONFIG_ENV_ADDR 0xffe04000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#endif - #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text); /* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -#ifdef CONFIG_MCFFEC -# define CONFIG_MII 1 -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC0_PINMUX 0 -# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -/* *----------------------------------------------------------------------------- * Define user parameters that have to be customized most likely *----------------------------------------------------------------------------- @@ -152,7 +99,6 @@ u-boot: 'set' command */ #if 0 -#define CONFIG_BOOTCOMMAND "bootm 0xffe80000" /*Autoboto command, please enter a valid image address in flash */ /* User network settings */ @@ -162,22 +108,8 @@ enter a valid image address in flash */ #endif -#define CONFIG_SYS_LOAD_ADDR 0x20000 /*Defines default RAM address -from which user programs will be started */ - /*---*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - /* *----------------------------------------------------------------------------- * End of user parameters to be customized @@ -189,9 +121,6 @@ from which user programs will be started */ * --- */ -#define CONFIG_SYS_MEMTEST_START 0x400 -#define CONFIG_SYS_MEMTEST_END 0x380000 - /* --- * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -214,21 +143,11 @@ from which user programs will be started */ #define CONFIG_SYS_SCR 0x0003 #define CONFIG_SYS_SPR 0xffff -/* --- - * Ethernet settings - * --- - */ - -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_ENET_BD_BASE 0x780000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in internal SRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -251,15 +170,7 @@ from which user programs will be started */ #define CONFIG_SYS_FLASH_BASE 0xffe00000 -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data @@ -269,16 +180,8 @@ from which user programs will be started */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 /* flash timeout */ - -/*----------------------------------------------------------------------- * Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - 8) @@ -294,36 +197,6 @@ from which user programs will be started */ CF_CACR_EUSP) /*----------------------------------------------------------------------- - * Memory bank definitions - * - * Please refer also to Motorola Coldfire user manual - Chapter XXX - * - */ -#define CONFIG_SYS_BR0_PRELIM 0xFFE00201 -#define CONFIG_SYS_OR0_PRELIM 0xFFE00014 - -#define CONFIG_SYS_BR1_PRELIM 0 -#define CONFIG_SYS_OR1_PRELIM 0 - -#define CONFIG_SYS_BR2_PRELIM 0 -#define CONFIG_SYS_OR2_PRELIM 0 - -#define CONFIG_SYS_BR3_PRELIM 0 -#define CONFIG_SYS_OR3_PRELIM 0 - -#define CONFIG_SYS_BR4_PRELIM 0 -#define CONFIG_SYS_OR4_PRELIM 0 - -#define CONFIG_SYS_BR5_PRELIM 0 -#define CONFIG_SYS_OR5_PRELIM 0 - -#define CONFIG_SYS_BR6_PRELIM 0 -#define CONFIG_SYS_OR6_PRELIM 0 - -#define CONFIG_SYS_BR7_PRELIM 0x00000701 -#define CONFIG_SYS_OR7_PRELIM 0xFF00007C - -/*----------------------------------------------------------------------- * LED config */ #define LED_STAT_0 0xffff /*all LEDs off*/