X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcmc_pu2.h;h=f32c8c2c66bf421c97f92accbda50d2fea9db6f0;hb=6bf6f114dcdd97ec3f80c2761ed40e31229d6b78;hp=12d0cca265be8a170daedbcc871fe58d6a561ca3;hpb=7cc1438d433c5c5ee65fcb588a4d70acb117af82;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 12d0cca..f32c8c2 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -26,14 +26,13 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK	207360000	/* from 18.432 MHz crystal (18432000 / 4 * 45) */
+#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
 
 #define AT91_SLOW_CLOCK		32768	/* slow clock */
 
 #define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
 #define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-#define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	*/
 #define CONFIG_CMC_PU2		1	/* on an CMC_PU2 Board		*/
 #undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 #define USE_920T_MMU		1
@@ -54,7 +53,7 @@
 #define SMC2_CSR_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL	0x202CBE04 /* 207.360 MHz for PCK */
+#define PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
 #define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
 #define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
 
@@ -105,35 +104,44 @@
 #define CFG_I2C_EEPROM_ADDR	0x50
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#else
+#define CONFIG_TIMESTAMP
 #endif
 /* still about 20 kB free with this defined */
 #define CFG_LONGHELP
 
-#define CONFIG_BOOTDELAY      3
+#define CONFIG_BOOTDELAY      1
 
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS		\
-		       ((CONFIG_CMD_DFL	| \
-			CFG_CMD_DATE	| \
-			CFG_CMD_DHCP 	| \
-			CFG_CMD_EEPROM	| \
-			CFG_CMD_I2C	| \
-			CFG_CMD_NFS	| \
-			CFG_CMD_SNTP  ) & \
-		      ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
-#else
-#define CONFIG_COMMANDS		\
-		       ((CONFIG_CMD_DFL	| \
-			CFG_CMD_DHCP 	| \
-			CFG_CMD_NFS	| \
-			CFG_CMD_SNTP  ) & \
-		      ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
-#define CONFIG_TIMESTAMP
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+
+#if defined(CONFIG_HARD_I2C)
+    #define CONFIG_CMD_DATE
+    #define CONFIG_CMD_EEPROM
+    #define CONFIG_CMD_I2C
 #endif
-#define CFG_LONGHELP
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP
 
 #define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
 #define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */
@@ -207,40 +215,31 @@ struct bd_info_ext {
 #error CONFIG_USE_IRQ not supported
 #endif
 
-#define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
-#define CONFIG_SILENT_CONSOLE	 1	/* enable silent startup	*/
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
-#define CONFIG_AUTOBOOT_STOP_STR "R"	/* default password */
-
-#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
-	"net_nfs=tftp $(loadaddr) $(bootfile);run nfsargs addip addcons " \
+	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
 		"addmtd;bootm\0" \
 	"nfsargs=setenv bootargs root=/dev/nfs rw " \
-		"nfsroot=$(serverip):$(rootpath)\0" \
-	"net_cramfs=tftp $(loadaddr) $(bootfile); run flashargs addip " \
+		"nfsroot=${serverip}:${rootpath}\0" \
+	"net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
 		"addcons addmtd; bootm\0" \
 	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
 	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
-	"addip=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
-		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
-		"$(hostname)::off\0" \
-	"addcons=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0" \
-	"addmtd=setenv bootargs $(bootargs) mtdparts=cmc_pu2:128k(uboot)ro," \
+	"addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
+		"${hostname}::off\0" \
+	"addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
+	"addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
 		"64k(environment),768k(linux),4096k(root),-\0" \
-	"load=tftp $(loadaddr) $(loadfile)\0" \
+	"load=tftp ${loadaddr} ${loadfile}\0" \
 	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
-		"cp.b $(loadaddr) 10000000 $(filesize);" \
+		"cp.b ${loadaddr} 10000000 ${filesize};" \
 		"protect on 10000000 1001ffff\0" \
-	"updatel=era 10030000 100effff;tftp $(loadaddr) $(bootfile); " \
-		"cp.b $(loadaddr) 10030000 $(filesize)\0" \
-	"updatec=era 100f0000 104effff;tftp $(loadaddr) $(cramfsimage); " \
-		"cp.b $(loadaddr) 100f0000 $(filesize)\0" \
-	"updatej=era 104f0000 107fffff;tftp $(loadaddr) $(jffsimage); " \
-		"cp.b $(loadaddr) 104f0000 $(filesize)\0" \
+	"updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
+		"cp.b ${loadaddr} 10030000 ${filesize}\0" \
+	"updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
+		"cp.b ${loadaddr} 100f0000 ${filesize}\0" \
+	"updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
+		"cp.b ${loadaddr} 104f0000 ${filesize}\0" \
 	"cramfsimage=cramfs_cmc-pu2.img\0" \
 	"jffsimage=jffs2_cmc-pu2.img\0" \
 	"loadfile=u-boot_cmc-pu2.bin\0" \