X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t54.h;h=952538d5a14040b505ec4b3805f11bdc2093f9c0;hb=529fb062081e100faae6dc0d163a548b8528ff24;hp=0cd4aec7e2f89a6343e7d1e4b56d7126a8818cc8;hpb=f10d86d3fff9f53723a404b3794cca98a785ce6a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 0cd4aec..952538d 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -16,15 +16,6 @@
 
 #include <configs/ti_omap5_common.h>
 
-#undef CONFIG_SPL_OS_BOOT
-
-/* Enable Generic board */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Device Tree defines */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 /* EEPROM related defines */
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
@@ -39,13 +30,6 @@
 #define CONFIG_SYS_NS16550_COM4		UART4_BASE
 #define CONFIG_BAUDRATE			115200
 
-/* SD/MMC RAW boot */
-#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
-#undef CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x200 /* 0x40000 - 256 KB */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300 /* 384 KB */
-
 /* MMC ENV related defines */
 #undef CONFIG_ENV_OFFSET
 #undef CONFIG_ENV_SIZE
@@ -57,18 +41,16 @@
 #define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_CMD_SAVEENV
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
 #define CONFIG_SUPPORT_EMMC_BOOT
 
 /* SATA Boot related defines */
-#define CONFIG_SPL_SATA_SUPPORT
 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
 
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
@@ -77,11 +59,8 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 /* USB UHH support options */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
@@ -89,9 +68,17 @@
 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO	83 /* HSIC3 ETH #RESET */
 
 /* Enabled commands */
-#define CONFIG_CMD_DHCP		/* DHCP Support			*/
-#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#define CONFIG_CMD_PING
+
+/* EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
+
+#define CONFIG_CMD_EEPROM_LAYOUT
+#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
 
 /* USB Networking options */
 #define CONFIG_USB_HOST_ETHER
@@ -107,14 +94,10 @@
  * Miscellaneous configurable options
  */
 #undef CONFIG_SYS_AUTOLOAD
-#undef CONFIG_SYS_PROMPT
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #undef CONFIG_BOOTCOMMAND
-#undef CONFIG_BOOTDELAY
 
-#define CONFIG_BOOTDELAY		3
 #define CONFIG_SYS_AUTOLOAD		"no"
-#define CONFIG_SYS_PROMPT		"CM-T54 # "
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \