X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t43.h;h=743c8c86922f013335d35ef4159c2da71611287d;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=55d9f5352b444bf302c97c66f25c9ecf3b50456d;hpb=6d7dacf726ca043a3f5487549bbfa506c990c813;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 55d9f53..743c8c8 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -8,33 +8,19 @@
 #ifndef __CONFIG_CM_T43_H
 #define __CONFIG_CM_T43_H
 
-#define CONFIG_CM_T43
-#define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
-#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
+#define CFG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
+#define CFG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
 
 #include <asm/arch/omap.h>
 
 /* Serial support */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK		48000000
-#define CONFIG_SYS_NS16550_COM1		0x44e09000
-#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#endif
+#define CFG_SYS_NS16550_CLK		48000000
+#define CFG_SYS_NS16550_COM1		0x44e09000
 
 /* NAND support */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+#define CFG_SYS_NAND_ECCSIZE		512
+#define CFG_SYS_NAND_ECCBYTES	14
+#define CFG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
 					 26, 27, 28, 29, 30, 31, 32, 33, \
@@ -42,45 +28,23 @@
 					 42, 43, 44, 45, 46, 47, 48, 49, \
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 
-/* CPSW Ethernet support */
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_SYS_RX_ETH_BUFFER	64
-
-/* USB support */
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_AM437X_USB2PHY2_HOST
-
-/* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_TPS65218
-
 /* Enabling L2 Cache */
-#define CONFIG_SYS_L2_PL310
-#define CONFIG_SYS_PL310_BASE		0x48242000
+#define CFG_SYS_PL310_BASE		0x48242000
 
 /*
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_HSMMC2_8BIT
 
 #include <configs/ti_armv7_omap.h>
-#undef CONFIG_SYS_MONITOR_LEN
 
 #define V_OSCK				24000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
 	"fdtaddr=0x81200000\0" \
 	"bootm_size=0x8000000\0" \
-	"autoload=no\0" \
 	"console=ttyO0,115200n8\0" \
 	"fdtfile=am437x-sb-som-t43.dtb\0" \
 	"kernel=zImage-cm-t43\0" \
@@ -99,27 +63,8 @@
 		"load mmc 1 ${fdtaddr} ${fdtfile} && " \
 		"bootz ${loadaddr} - ${fdtaddr}\0"
 
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev 0; " \
-	"if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"fi; " \
-	"fi; " \
-	"mmc dev 1; " \
-	"if mmc rescan; then " \
-		"run emmcboot; " \
-	"fi;"
-
 /* SPL defines. */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#define CONFIG_SYS_EEPROM_SIZE			256
 
 #endif	/* __CONFIG_CM_T43_H */