X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t43.h;h=1e63098d5f17f0f50e3a000683f09046ac022b84;hb=a1dc980d88a5c9c2b99251c8d8299b0c8948de73;hp=1c1951c4c5ff9ea8365cbcb0749649d29569068b;hpb=e1417c7b66f4e0051a3aa242f655e85c1c96eef2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 1c1951c..1e63098 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -60,11 +60,7 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	64
 
 /* USB support */
-#define CONFIG_USB_HOST
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_AM437X_USB2PHY2_HOST
@@ -82,7 +78,6 @@
 /* Enabling L2 Cache */
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE		0x48242000
-#define CONFIG_SYS_CACHELINE_SIZE	32
 
 /*
  * Since SPL did pll and ddr initialization for us,
@@ -95,13 +90,7 @@
 #define CONFIG_HSMMC2_8BIT
 
 #include <configs/ti_armv7_omap.h>
-#undef CONFIG_SPL_OS_BOOT
-#undef CONFIG_SPL_GPIO_SUPPORT
-#undef CONFIG_SPL_NAND_SUPPORT
 #undef CONFIG_SYS_MONITOR_LEN
-#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#undef CONFIG_CMD_IMLS
 
 #define CONFIG_ENV_SIZE			(16 * 1024)
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -114,11 +103,7 @@
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_ENV_SPI_MAX_HZ           48000000
 
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
@@ -155,21 +140,20 @@
 		"run emmcboot; " \
 	"fi;"
 
-
 #define CONFIG_CONS_INDEX		1
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		0x40300350
-#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x480
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
+
+/* EEPROM */
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
 
 #endif	/* __CONFIG_CM_T43_H */