X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t3517.h;h=edb52be5a83cc48ef0369ba81737a3ec59a254ac;hb=529fb062081e100faae6dc0d163a548b8528ff24;hp=0aefec8a004ec1d8bf67c7e55bab875efe152940;hpb=a85670e40da1ef4f299effb73c36e48d39d50106;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 0aefec8..edb52be 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -28,7 +28,6 @@
  * Although the default iss 64, we still define it
  * to be on the safe side once the default is changed.
  */
-#define CONFIG_SYS_CACHELINE_SIZE	64
 
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
@@ -37,19 +36,12 @@
 
 #define CONFIG_MACH_TYPE                MACH_TYPE_CM_T3517
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Clock Defines */
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_OF_LIBFDT
 /*
  * The early kernel mapping on ARM currently only maps from the base of DRAM
  * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
@@ -87,7 +79,6 @@
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3	/* UART3 */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -112,17 +103,10 @@
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
 #else /* !CONFIG_USB_MUSB_AM35X */
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_USB_MUSB_PIO_ONLY
 #endif /* CONFIG_USB_MUSB_AM35X */
 
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB
-
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
@@ -131,12 +115,7 @@
 				"1920k(u-boot),256k(u-boot-env),"\
 				"4m(kernel),-(fs)"
 
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -161,9 +140,6 @@
 							/* devices */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"baudrate=115200\0" \
@@ -204,7 +180,6 @@
 		"nand read ${loadaddr} 2a0000 400000; " \
 		"bootm ${loadaddr}\0" \
 
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
@@ -225,7 +200,6 @@
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD		"no"
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -307,7 +281,6 @@
 #define CONFIG_VIDEO_OMAP3
 #define LCD_BPP		LCD_COLOR16
 
-#define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASHIMAGE_GUARD
 #define CONFIG_CMD_BMP
@@ -316,4 +289,15 @@
 
 #define CONFIG_OMAP3_SPI
 
+/* EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
+
+#define CONFIG_CMD_EEPROM_LAYOUT
+#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3"
+
 #endif /* __CONFIG_H */