X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t3517.h;h=6ee61d5a8613f6ed79fb75445865950db34ae3c3;hb=2d8d190c8394b43c0989cdb04a50cb48d4e1f8da;hp=d8a29f04dd3584e336e23a6f89a289e8814576f5;hpb=e6de55ec5bf306df3b3cc8e7a4cc17fa1e78ca6c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index d8a29f0..6ee61d5 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -10,14 +10,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 /*
  * High Level Configuration Options
  */
 #define CONFIG_OMAP	/* in a TI OMAP core */
 #define CONFIG_CM_T3517	/* working with CM-T3517 */
-#define CONFIG_OMAP_COMMON
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
@@ -30,7 +27,6 @@
  * Although the default iss 64, we still define it
  * to be on the safe side once the default is changed.
  */
-#define CONFIG_SYS_CACHELINE_SIZE	64
 
 #define CONFIG_EMIF4	/* The chip has EMIF4 controller */
 
@@ -39,12 +35,6 @@
 
 #define CONFIG_MACH_TYPE                MACH_TYPE_CM_T3517
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Clock Defines */
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
@@ -88,7 +78,6 @@
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3	/* UART3 */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -99,8 +88,6 @@
 #define CONFIG_OMAP_GPIO
 
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
 #define CONFIG_DOS_PARTITION
 
 /* USB */
@@ -113,17 +100,10 @@
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
 #else /* !CONFIG_USB_MUSB_AM35X */
-#define CONFIG_USB_MUSB_HOST
 #define CONFIG_USB_MUSB_PIO_ONLY
 #endif /* CONFIG_USB_MUSB_AM35X */
 
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB
-
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
@@ -132,12 +112,7 @@
 				"1920k(u-boot),256k(u-boot-env),"\
 				"4m(kernel),-(fs)"
 
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -162,9 +137,6 @@
 							/* devices */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"baudrate=115200\0" \
@@ -205,7 +177,6 @@
 		"nand read ${loadaddr} 2a0000 400000; " \
 		"bootm ${loadaddr}\0" \
 
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
@@ -226,7 +197,6 @@
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD		"no"
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -287,18 +257,10 @@
 					 GENERATED_GBL_DATA_SIZE)
 
 /* Status LED */
-#define CONFIG_STATUS_LED		/* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED
-#define CONFIG_GPIO_LED
 #define GREEN_LED_GPIO			186 /* CM-T3517 Green LED is GPIO186 */
-#define GREEN_LED_DEV			0
-#define STATUS_LED_BIT			GREEN_LED_GPIO
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT			GREEN_LED_DEV
 
 /* GPIO banks */
-#ifdef CONFIG_STATUS_LED
+#ifdef CONFIG_LED_STATUS
 #define CONFIG_OMAP3_GPIO_6	/* GPIO186 is in GPIO bank 6  */
 #endif
 
@@ -308,7 +270,6 @@
 #define CONFIG_VIDEO_OMAP3
 #define LCD_BPP		LCD_COLOR16
 
-#define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASHIMAGE_GUARD
 #define CONFIG_CMD_BMP
@@ -317,4 +278,15 @@
 
 #define CONFIG_OMAP3_SPI
 
+/* EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_EEPROM_SIZE			256
+
+#define CONFIG_CMD_EEPROM_LAYOUT
+#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3"
+
 #endif /* __CONFIG_H */