X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t3517.h;h=0ab3930e5a43d18991f85b6ceebf7cb43a20594d;hb=8ccf98b1cfd2811e3121c719e294bdd8ebab1c45;hp=c179a2b5b821d18378400b28cbd6763c912941c6;hpb=e5bda8a2d88f8f3eba308fb30d7e12f3a50ab6b5;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index c179a2b..0ab3930 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2013 CompuLab, Ltd. * Author: Igor Grinberg * * Configuration settings for the CompuLab CM-T3517 board - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -13,19 +12,14 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_CM_T3517 /* working with CM-T3517 */ -#define CONFIG_SYS_TEXT_BASE 0x80008000 - /* * This is needed for the DMA stuff. * Although the default iss 64, we still define it * to be on the safe side once the default is changed. */ -#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ - #include /* get chip and board defs */ #include @@ -35,8 +29,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_MISC_INIT_R - /* * The early kernel mapping on ARM currently only maps from the base of DRAM * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. @@ -71,46 +63,24 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 #define CONFIG_SERIAL3 3 /* UART3 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_OMAP_GPIO - /* USB */ -#define CONFIG_USB_MUSB_AM35X #ifndef CONFIG_USB_MUSB_AM35X -#define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 -#else /* !CONFIG_USB_MUSB_AM35X */ -#define CONFIG_USB_MUSB_PIO_ONLY #endif /* CONFIG_USB_MUSB_AM35X */ /* commands to include */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ - "1920k(u-boot),256k(u-boot-env),"\ - "4m(kernel),-(fs)" - -#define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 400000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_I2C_EEPROM_BUS 0 @@ -119,9 +89,6 @@ /* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ @@ -184,18 +151,10 @@ /* * Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) @@ -211,7 +170,6 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 #define CONFIG_SYS_CS0_SIZE (256 << 20) @@ -224,18 +182,11 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_ENV_IS_IN_NAND -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_ENV_OFFSET 0x260000 +#define CONFIG_ENV_ADDR 0x260000 #if defined(CONFIG_CMD_NET) -#define CONFIG_DRIVER_TI_EMAC #define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_MII -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) #define CONFIG_ARP_TIMEOUT 200UL #define CONFIG_NET_RETRY_COUNT 5 #endif /* CONFIG_CMD_NET */ @@ -251,34 +202,20 @@ /* Status LED */ #define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ -/* GPIO banks */ -#ifdef CONFIG_LED_STATUS -#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ -#endif - /* Display Configuration */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 #define CONFIG_VIDEO_OMAP3 #define LCD_BPP LCD_COLOR16 #define CONFIG_SPLASH_SCREEN #define CONFIG_SPLASHIMAGE_GUARD -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_SCF0403_LCD -#define CONFIG_OMAP3_SPI - /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3" - #endif /* __CONFIG_H */