X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t3517.h;h=0ab3930e5a43d18991f85b6ceebf7cb43a20594d;hb=8ccf98b1cfd2811e3121c719e294bdd8ebab1c45;hp=282b7ae10c97fb300ebded0834f88c8ef73dc780;hpb=a0e80c97c9ba1409c2370f6c8b2a4d6a48cdb15c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 282b7ae..0ab3930 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 CompuLab, Ltd.
  * Author: Igor Grinberg <grinberg@compulab.co.il>
  *
  * Configuration settings for the CompuLab CM-T3517 board
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,16 +14,12 @@
  */
 #define CONFIG_CM_T3517	/* working with CM-T3517 */
 
-#define CONFIG_SYS_TEXT_BASE	0x80008000
-
 /*
  * This is needed for the DMA stuff.
  * Although the default iss 64, we still define it
  * to be on the safe side once the default is changed.
  */
 
-#define CONFIG_EMIF4	/* The chip has EMIF4 controller */
-
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 
@@ -34,8 +29,6 @@
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
 /*
  * The early kernel mapping on ARM currently only maps from the base of DRAM
  * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
@@ -70,7 +63,6 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3	/* UART3 */
 
@@ -80,27 +72,15 @@
 					115200}
 
 /* USB */
-#define CONFIG_USB_MUSB_AM35X
 
 #ifndef CONFIG_USB_MUSB_AM35X
-#define CONFIG_USB_OMAP3
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
-#else /* !CONFIG_USB_MUSB_AM35X */
-#define CONFIG_USB_MUSB_PIO_ONLY
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 /* commands to include */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT		"nand0=nand"
-#define MTDPARTS_DEFAULT	"mtdparts=nand:512k(x-loader),"\
-				"1920k(u-boot),256k(u-boot-env),"\
-				"4m(kernel),-(fs)"
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_SYS_I2C_EEPROM_BUS	0
@@ -109,9 +89,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
@@ -174,11 +151,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD		"no"
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		32	/* max number of command args */
 
@@ -196,7 +170,6 @@
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	1	/* CM-T3517 DRAM is only on CS0 */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
 #define CONFIG_SYS_CS0_SIZE		(256 << 20)
 
@@ -209,17 +182,11 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET		0x260000
+#define CONFIG_ENV_ADDR			0x260000
 
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_MII
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE	(0x2C000000 + (16 << 20))
 #define CONFIG_ARP_TIMEOUT		200UL
 #define CONFIG_NET_RETRY_COUNT		5
 #endif /* CONFIG_CMD_NET */