X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t35.h;h=fd693cf25141167eaa20e465bfa9288a2d075076;hb=85e1900d9935b2b9fe02e0b3faba75e1695af172;hp=6e7dcc66de711817f292baabea6f04dd3c021506;hpb=1c7b5d0309c1da3952b1236d42c82c5ea8446476;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 6e7dcc6..fd693cf 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
@@ -10,8 +11,6 @@
  * Syed Mohammed Khasim <x0khasim@ti.com>
  *
  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -31,8 +30,6 @@
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -62,35 +59,20 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
-/* USB */
-#define CONFIG_USB_OMAP3
-#define CONFIG_USB_MUSB_UDC
-#define CONFIG_TWL4030_USB
-
 /* USB device configuration */
 #define CONFIG_USB_DEVICE
 #define CONFIG_USB_TTY
 
 /* commands to include */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT		"nand0=nand"
-#define MTDPARTS_DEFAULT	"mtdparts=nand:512k(x-loader),"\
-				"1920k(u-boot),256k(u-boot-env),"\
-				"4m(kernel),-(fs)"
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_SYS_I2C_EEPROM_BUS	0
@@ -99,14 +81,10 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_LED
 
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */
@@ -168,11 +146,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD		"no"
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
 								/* works on */
@@ -193,7 +168,6 @@
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	1	/* CS1 is never populated */
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
 
 /*-----------------------------------------------------------------------
@@ -208,14 +182,6 @@
 #define CONFIG_ENV_OFFSET		0x260000
 #define CONFIG_ENV_ADDR			0x260000
 
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CM_T3X_SMC911X_BASE	0x2C000000
-#define SB_T35_SMC911X_BASE	(CM_T3X_SMC911X_BASE + (16 << 20))
-#define CONFIG_SMC911X_BASE	CM_T3X_SMC911X_BASE
-#endif /* (CONFIG_CMD_NET) */
-
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
@@ -230,7 +196,6 @@
 #define CONFIG_SPLASHIMAGE_GUARD
 
 /* Display Configuration */
-#define CONFIG_VIDEO_OMAP3
 #define LCD_BPP		LCD_COLOR16
 
 #define CONFIG_SPLASH_SCREEN
@@ -239,8 +204,6 @@
 #define CONFIG_SCF0403_LCD
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
@@ -269,7 +232,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 
-#define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
 
@@ -278,7 +240,6 @@
  * older x-loader implementations. And move the BSS area so that it
  * doesn't overlap with TEXT_BASE.
  */
-#define CONFIG_SYS_TEXT_BASE		0x80008000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */