X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t35.h;h=fd693cf25141167eaa20e465bfa9288a2d075076;hb=85e1900d9935b2b9fe02e0b3faba75e1695af172;hp=0fb853002c08abe3efd200bc476bde12f9a1441c;hpb=d7d000311285e4b8d11e089ca13ea456a01be3b8;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 0fb8530..fd693cf 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2011 CompuLab, Ltd. * Mike Rapoport @@ -10,8 +11,6 @@ * Syed Mohammed Khasim * * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -22,32 +21,15 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -#define CONFIG_SDRC /* The chip has SDRC controller */ #include /* get chip and board defs */ #include -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_MISC_INIT_R - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -77,50 +59,20 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* USB */ -#define CONFIG_USB_OMAP3 -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_OMAP -#define CONFIG_USB_STORAGE -#define CONFIG_USB_MUSB_UDC -#define CONFIG_TWL4030_USB - /* USB device configuration */ #define CONFIG_USB_DEVICE #define CONFIG_USB_TTY -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* commands to include */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ - "1920k(u-boot),256k(u-boot-env),"\ - "4m(kernel),-(fs)" - -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_I2C_EEPROM_BUS 0 @@ -129,15 +81,10 @@ /* * TWL4030 */ -#define CONFIG_TWL4030_POWER -#define CONFIG_TWL4030_LED /* * Board NAND Info. */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ @@ -145,9 +92,6 @@ /* devices */ /* Environment information */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ @@ -202,18 +146,8 @@ /* * Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ /* works on */ @@ -234,7 +168,6 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 /*----------------------------------------------------------------------- @@ -246,18 +179,8 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_ENV_IS_IN_NAND -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - -#if defined(CONFIG_CMD_NET) -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CM_T3X_SMC911X_BASE 0x2C000000 -#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20)) -#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE -#endif /* (CONFIG_CMD_NET) */ +#define CONFIG_ENV_OFFSET 0x260000 +#define CONFIG_ENV_ADDR 0x260000 /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 @@ -268,63 +191,26 @@ GENERATED_GBL_DATA_SIZE) /* Status LED */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ -#define GREEN_LED_DEV 0 -#define STATUS_LED_BIT GREEN_LED_GPIO -#define STATUS_LED_STATE STATUS_LED_ON -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_BOOT GREEN_LED_DEV #define CONFIG_SPLASHIMAGE_GUARD -/* GPIO banks */ -#ifdef CONFIG_STATUS_LED -#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ -#endif - /* Display Configuration */ -#define CONFIG_OMAP3_GPIO_2 -#define CONFIG_OMAP3_GPIO_5 -#define CONFIG_VIDEO_OMAP3 #define LCD_BPP LCD_COLOR16 -#define CONFIG_LCD #define CONFIG_SPLASH_SCREEN #define CONFIG_SPLASH_SOURCE -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_SCF0403_LCD -#define CONFIG_OMAP3_SPI - /* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE @@ -346,15 +232,14 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ + CONFIG_SPL_TEXT_BASE) /* * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the * older x-loader implementations. And move the BSS area so that it * doesn't overlap with TEXT_BASE. */ -#define CONFIG_SYS_TEXT_BASE 0x80008000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ @@ -362,14 +247,10 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* EEPROM */ -#define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 #define CONFIG_SYS_EEPROM_SIZE 256 -#define CONFIG_CMD_EEPROM_LAYOUT -#define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3" - #endif /* __CONFIG_H */