X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t35.h;h=de1999d431e4e256e4ac1a381a4f4d9f4ec5e016;hb=6beacfcff81bdc04c10a440971b0fb683ee57534;hp=e2d5bbb0955d266b952bc05d5e4075c0a2e05149;hpb=987ec5851c5c303417fb04a6a0fed6e4603e1a24;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index e2d5bbb..de1999d 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -17,15 +17,19 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* * High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP_GPIO -#define CONFIG_CMD_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ #define CONFIG_OMAP_COMMON -#define CONFIG_SYS_GENERIC_BOARD +/* Common ARM Erratas */ +#define CONFIG_ARM_ERRATA_454179 +#define CONFIG_ARM_ERRATA_430973 +#define CONFIG_ARM_ERRATA_621766 #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -44,8 +48,6 @@ #define CONFIG_MISC_INIT_R -#define CONFIG_OF_LIBFDT 1 - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -68,7 +70,6 @@ */ #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK @@ -96,9 +97,8 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP #define CONFIG_USB_STORAGE -#define CONFIG_MUSB_UDC +#define CONFIG_USB_MUSB_UDC #define CONFIG_TWL4030_USB -#define CONFIG_CMD_USB /* USB device configuration */ #define CONFIG_USB_DEVICE @@ -106,11 +106,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* commands to include */ -#include - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS @@ -119,15 +114,7 @@ "1920k(u-boot),256k(u-boot-env),"\ "4m(kernel),-(fs)" -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C @@ -148,7 +135,6 @@ /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ @@ -159,7 +145,6 @@ /* devices */ /* Environment information */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -201,7 +186,6 @@ "nand read ${loadaddr} 2a0000 400000; " \ "bootm ${loadaddr}\0" \ -#define CONFIG_CMD_BOOTZ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ @@ -222,8 +206,6 @@ #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "CM-T3x # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -378,4 +360,15 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +/* EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#define CONFIG_SYS_EEPROM_SIZE 256 + +#define CONFIG_CMD_EEPROM_LAYOUT +#define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3" + #endif /* __CONFIG_H */