X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fcm_t35.h;h=2dc745e59ff7f1ed4602260b03b12a128ea69c45;hb=a85670e40da1ef4f299effb73c36e48d39d50106;hp=f6acf6920524070e340e2653daa6000d11c671e7;hpb=77b83e6d099cb2149e5b2c33a700003227d99297;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index f6acf69..2dc745e 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -21,16 +21,18 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX	/* which is a 34XX */
 #define CONFIG_OMAP_GPIO
-#define CONFIG_CMD_GPIO
 #define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SDRC	/* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -68,7 +70,6 @@
  */
 #define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
@@ -96,7 +97,7 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_USB_STORAGE
-#define CONFIG_MUSB_UDC
+#define CONFIG_USB_MUSB_UDC
 #define CONFIG_TWL4030_USB
 #define CONFIG_CMD_USB
 
@@ -106,8 +107,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
@@ -125,9 +124,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -136,6 +132,7 @@
 #define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_I2C_EEPROM_BUS	0
 #define CONFIG_I2C_MULTI_BUS
 
 /*
@@ -147,7 +144,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
@@ -156,7 +152,6 @@
 							/* CS0 */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
 
 /* Environment information */
 #define CONFIG_BOOTDELAY		3
@@ -223,7 +218,6 @@
 #define CONFIG_SYS_AUTOLOAD		"no"
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"CM-T3x # "
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -259,9 +253,6 @@
  */
 
 /* **** PISMO SUPPORT *** */
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
@@ -313,6 +304,7 @@
 
 #define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
@@ -320,14 +312,13 @@
 #define CONFIG_OMAP3_SPI
 
 /* Defines for SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -368,7 +359,6 @@
 
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the